Objetivo CAD systems do not have facilities to do iterative calculations on the strength of the design, the distortion of the design or other physical changes and effects which occur during product-service lifecycle. Separate computer programmes such as Finite Element solver carry out the calculations necessary for the checking of the product during lifecycle. They can only be handle one shape of product at a time. To make changes, the engineer must make the decision and manually change the problem without recommendation. This means that not much iteration, usually one time in SME, are made and a less than optimal design is made. The aim of this project is to take the calculation stage from CAD and develop an interface with FE to automate calculations necessary for the checking of the product in dynamic use (Lifecycle). The system will undertake many repeat calculations automatically changing the design against given rules until an optimum is obtained. Programa(s) FP5-GROWTH - Programme for research technological development and demonstration on "Competitive and sustainable growth 1998-2002" Tema(s) 1.1.3.-1. - Key Action Innovative Products, Processes and Organisation Convocatoria de propuestas Data not available Régimen de financiación EAW - Exploratory awards Coordinador ROSS COURTNEY LIMITED Aportación de la UE Sin datos Dirección Building 56, the Pensnett Estate DY6 7PP DUDLEY Reino Unido Ver en el mapa Coste total Sin datos Participantes (1) Ordenar alfabéticamente Ordenar por aportación de la UE Ampliar todo Contraer todo DYNAMIC DESIGN SOLUTIONS N.V. Bélgica Aportación de la UE Sin datos Dirección 64,Interleuvenlaan 64 3001 HEVERLEE Ver en el mapa Coste total Sin datos
