Cel Many industries operate their process at high temperatures and if the operating temperature exceeds 0.4Tm (Tm= melting temperature) then creep becomes a significant problem. Welds in pipes are very susceptible to creep failure that is often sudden and catastrophic. The present method of dealing with this problem is to shut down the process to enable physical inspection. This is extremely expensive and cannot give an absolute assurance regarding fault detection. Thus, there is a demonstrable need for remotely operated, on-stream, non-destructive testing system. The development of industrial laser systerial has reached the stage at which it is possible to use the beam to excite a metallic structure, inducing a vibration. The amplitude of the vibration can then be measured by a second laser to give a good indication of component integrity. The proposed system will use only one laser, splitting the pulse to allow it to perform both the excitation and the vibration analysis. Dziedzina nauki natural sciencesphysical sciencesopticslaser physics Program(-y) FP5-GROWTH - Programme for research technological development and demonstration on "Competitive and sustainable growth 1998-2002" Temat(-y) 1.1.3.-6. - RTD Activities of a Generic Nature : Measurements and Testing Zaproszenie do składania wniosków Data not available System finansowania EAW - Exploratory awards Koordynator DRB MATERIALS TECHNOLOGY Wkład UE Brak danych Adres The Square IRC House SO41 8GN LYMINGTON Zjednoczone Królestwo Zobacz na mapie Koszt całkowity Brak danych Uczestnicy (1) Sortuj alfabetycznie Sortuj według wkładu UE Rozwiń wszystko Zwiń wszystko BBT INSTRUMENTER APS. Dania Wkład UE Brak danych Adres 6,Ericaparken 23 2820 GENTOFFE Zobacz na mapie Koszt całkowity Brak danych