Objetivo The main objective of the project will be to design, develop and test new cost-effective control system components to be integrated in wind turbines of more than 1 MW of power. These new components and its specific objectives will be: . To design a new medium voltage (>=6,000 volt) synchronous generator, together with its frequency control system for 50 Hz . To design an advanced control algorithm that will act over the blade pitch and over the main shaft, in order to reduce mechanical and fatigue loads induced in all of the components of the wind turbine. . To establish a methodology of data acquisition for monitoring the real performance achieved in the machines and for the improvements achieved in load reduction and quality of the generated electricity Ámbito científico engineering and technologyelectrical engineering, electronic engineering, information engineeringelectronic engineeringcontrol systemsengineering and technologyenvironmental engineeringenergy and fuelsrenewable energywind power Programa(s) FP5-EESD - Programme for research, technological development and demonstration on "Energy, environment and sustainable development, 1998-2002" Tema(s) 1.1.4.-6. - Key action Economic and Efficient Energy for a Competitive Europe Convocatoria de propuestas Data not available Régimen de financiación EAW - Exploratory awards Coordinador INGETEAM S.A. Aportación de la UE Sin datos Dirección 2,Pinto Maetzu 2 31008 PAMPLONA España Ver en el mapa Coste total Sin datos
