Objectif The aim of the project is to optimise the metallurgical structure and the crystallographic texture of continuously-annealed steel sheets for highly competitive tinplate end tops of easy-opening full-aperture cans. The application requires the lowest resistance to tearing by shear normal to the sheet plane compatible with the required resistance to internal can pressure. Such compromise involves fracture and plastic properties of the material, related with structural parameters (inclusion contents, hardening state, crystallographic texture), which can be independently controlled during the metallurgical process. In particular, a fundamentally-based index for qualifying tin-plate for the application will be looked for. Such index will be used as a guide for the comparison of the relative aptitude of different steels grades, different continuous annealing cycles and different final (single or double) reduction states for making easy-opening can ends. Programme(s) ECSC-STEEL C - Medium-term guidelines for the ECSC steel RTD programme of research and pilot/demonstration projects, 1996-2002 Thème(s) F4 - Thin sheets Appel à propositions Data not available Régime de financement CSC - Cost-sharing contracts Coordinateur CENTRO DE ESTUDIOS E INVESTIGACIONES TECNICAS DE GUIPUZKOA Contribution de l’UE Aucune donnée Adresse M. de Manuel Lardizábal, 15 Barrio de Ibaeta 20018 SAN SEBASTIAN Espagne Voir sur la carte Coût total Aucune donnée Participants (3) Trier par ordre alphabétique Trier par contribution de l’UE Tout développer Tout réduire ACERALIA CORPORACION SIDERURGICA Espagne Contribution de l’UE Aucune donnée Adresse Carmen, 2 48901 BARACALDO (VIZCAYA) Voir sur la carte Coût total Aucune donnée CENTRO SVILUPPO MATERIALI Italie Contribution de l’UE Aucune donnée Adresse Via di Castel Romano 100 00128 ROMA EUR Voir sur la carte Coût total Aucune donnée RASSELSTEIN HOESCH Allemagne Contribution de l’UE Aucune donnée Adresse Koblenzer Straße 141 56625 ANDERNACH Voir sur la carte Coût total Aucune donnée