Objetivo Forming simulations are necessary to prove the feasibility of the parts with steel sheets. The material models, which are used in the moment are probably not optimised for new steel grades (DP, CP, TRIP), but there are no measurements to get the material parameters for more advanced and more appropriate material models. The objective of this project is to get the material parameters for advanced material models as simple and effective as possible by means of optimisation algorithms. Programa(s) ECSC-STEEL C - Medium-term guidelines for the ECSC steel RTD programme of research and pilot/demonstration projects, 1996-2002 Tema(s) F4 - Thin sheets Convocatoria de propuestas Data not available Régimen de financiación CSC - Cost-sharing contracts Coordinador UNIVERSITÄT DORTMUND - FAKULTÄT MASCHINENBAU, LFU Aportación de la UE Sin datos Dirección Baroper Strasse, 301 44221 DORTMUND Alemania Ver en el mapa Coste total Sin datos Participantes (4) Ordenar alfabéticamente Ordenar por aportación de la UE Ampliar todo Contraer todo AUTOFORM ENGINEERING DEUTSCHLAND GMBH Alemania Aportación de la UE Sin datos Dirección Emil-Figgestraße 76 44227 DORTMUND Ver en el mapa Coste total Sin datos CORUS TECHNOLOGY BV Países Bajos Aportación de la UE Sin datos Dirección 1970 CA IJMUIDEN Ver en el mapa Coste total Sin datos SOLLAC Francia Aportación de la UE Sin datos Dirección Immeuble "PACIFIC", La Défense 7 11/13 Cours Valmy 92800 PUTEAUX Ver en el mapa Coste total Sin datos THYSSEN KRUPP STAHL Alemania Aportación de la UE Sin datos Dirección Kaiser-Wilhelmstrasse 100 47166 DUISBURG Ver en el mapa Coste total Sin datos