Objectif The main aim of the project is to study and to optimise the sinter strand charging device as well as the feeding practice, in order to improve bed homogeneity and permeability. The first new aspect of this project is to explain the complex phenomena occurring during the strand feeding operation and to propose simple and cheap ways to optimise "classical" feeding device such as permeability bars. The second innovative aspect concern the development of an on-line measurement of crude bed permeability, allowing early feed back adjustment of operating parameters. The project leads to an improvement of both bed permeability and homogeneity. Thus, depending of the industrial context of each company, we can expect to increase productivity of sinter plant (5 to 10%), or to decrease sinter cost through a lower burnt lime ratio (5 to 10%) or a cheaper iron ores mixture. Programme(s) ECSC-STEEL C - Medium-term guidelines for the ECSC steel RTD programme of research and pilot/demonstration projects, 1996-2002 Thème(s) B - Reduction of iron ores Appel à propositions Data not available Régime de financement CSC - Cost-sharing contracts Coordinateur INSTITUT DE RECHERCHES DE LA SIDERURGIE FRANÇAISE Contribution de l’UE Aucune donnée Adresse Immeuble "PACIFIC", La Défense 7 11/13 Cours Valmy 92800 PUTEAUX France Voir sur la carte Coût total Aucune donnée Participants (3) Trier par ordre alphabétique Trier par contribution de l’UE Tout développer Tout réduire AG DER DILLINGER HÜTTENWERKE Allemagne Contribution de l’UE Aucune donnée Adresse 66748 DILLINGEN/SAAR Voir sur la carte Coût total Aucune donnée Betriebsforschungsinstitut des Verein Deutscher Eisenhüttenleute eV Allemagne Contribution de l’UE Aucune donnée Adresse Sohnstraße 65 40237 Düsseldorf Voir sur la carte Coût total Aucune donnée VOEST-ALPINE STAHL DONAWITZ Autriche Contribution de l’UE Aucune donnée Adresse Kerpelystrasse 199 8700 LEOBEN-DONAWITZ Voir sur la carte Coût total Aucune donnée