Objectif This project has the aims to improve and to extend the process observation and control system from a nearly terminated ECSC project on AOD converter control, as well as to extend and to apply refractory wear modelling from an earlier ECSC project on refractory performance in the AOD converter. The optimal time for switching the inert gas from nitrogen to more expensive argon shall be determined by on-line simulation of nitrogen pick-up and prediction of subsequent denitrogenation, in order to decrease the argon consumption and to adjust the final steel nitrogen content more accurately. The knowledge of the development of different kinds of refractory wear in the converter will allow to build a model which enables to find the best set of refractory materials and to define converter operating practices with reduced refractory consumption. Programme(s) ECSC-STEEL C - Medium-term guidelines for the ECSC steel RTD programme of research and pilot/demonstration projects, 1996-2002 Thème(s) C2 - Secondary steelmaking Appel à propositions Data not available Régime de financement CSC - Cost-sharing contracts Coordinateur Betriebsforschungsinstitut des Verein Deutscher Eisenhüttenleute eV Contribution de l’UE Aucune donnée Adresse Sohnstraße 65 40237 Düsseldorf Allemagne Voir sur la carte Coût total Aucune donnée Participants (3) Trier par ordre alphabétique Trier par contribution de l’UE Tout développer Tout réduire CENTRO SVILUPPO MATERIALI SPA Italie Contribution de l’UE Aucune donnée Adresse Via di Castel Romano 100/102 00128 ROMA EUR Voir sur la carte Coût total Aucune donnée THYSSENKRUPP ACCIAI SPECIALI TERNI Italie Contribution de l’UE Aucune donnée Adresse Viale B. Brin, 218 05100 TERNI Voir sur la carte Coût total Aucune donnée THYSSENKRUPP NIROSTA GMBH Allemagne Contribution de l’UE Aucune donnée Adresse Oberschlesienstrasse 16 47807 KREFELD Voir sur la carte Coût total Aucune donnée