Objectif The mould heat transfer conditions are a decisive key factor for a stable casting process and optimal product quality. Many individual parameters influencing the mould heat transfer have been subject of detailed studies in the past. However, only few attempts have been made to correlate the heat transfer with a combined detailed investigation of the main process parameters like casting powder/lubrication, mould taper/air gap, mould coating, oscillation strategies, friction forces and mould wear. It is therefore the aim of this research to investigate and improve the mould heat transfer conditions for the continuous casting of slabs and long products by optimisation of the above-mentioned parameters. As an outcome of this research concrete process engineering measures for an improved mould heat transfer control are expected. Programme(s) ECSC-STEEL C - Medium-term guidelines for the ECSC steel RTD programme of research and pilot/demonstration projects, 1996-2002 Thème(s) C3 - Casting and solidification Appel à propositions Data not available Régime de financement CSC - Cost-sharing contracts Coordinateur Betriebsforschungsinstitut des Verein Deutscher Eisenhüttenleute eV Contribution de l’UE Aucune donnée Adresse Sohnstraße 65 40237 Düsseldorf Allemagne Voir sur la carte Coût total Aucune donnée Participants (4) Trier par ordre alphabétique Trier par contribution de l’UE Tout développer Tout réduire CENTRO SVILUPPO MATERIALI SPA Italie Contribution de l’UE Aucune donnée Adresse Via di Castel Romano 100/102 00128 ROMA EUR Voir sur la carte Coût total Aucune donnée COGNE ACCIAI SPECIALI Italie Contribution de l’UE Aucune donnée Adresse Via Paravera 16 11100 AOSTA Voir sur la carte Coût total Aucune donnée Dillinger Hüttenwerke AG Allemagne Contribution de l’UE Aucune donnée Adresse 66748 Dillingen Voir sur la carte Coût total Aucune donnée SIDENOR I+D Espagne Contribution de l’UE Aucune donnée Adresse Barrio Ugarte s/n 48970 BASAURI (VIZCAYA) Voir sur la carte Coût total Aucune donnée