Objectif Initial solidification in the casting mould has an enormous impact on surface quality. Uniform heat transfer and good lubrication are of vital importance and these are affected by the efficient delivery of mould powder and the stability of the steel meniscus. The project will aim to demonstrate techniques to improve the delivery and utilisation of powder and to stabilise the mould level. Intelligent automatic powder feed systems will be developed and mould thermal conditions will be modified by adjusting casting parameters. A novel mould level measuring device will be used to demonstrate improved mould level control. Programme(s) ECSC-STEEL C - Medium-term guidelines for the ECSC steel RTD programme of research and pilot/demonstration projects, 1996-2002 Thème(s) T2 - Continuous casting Appel à propositions Data not available Régime de financement CSC - Cost-sharing contracts Coordinateur CORUS UK LIMITED Contribution de l’UE Aucune donnée Adresse 15 Great Marlborough Street W1F 7AS LONDON Royaume-Uni Voir sur la carte Coût total Aucune donnée Participants (2) Trier par ordre alphabétique Trier par contribution de l’UE Tout développer Tout réduire CENTRE DE RECHERCHES METALLURGIQUES Belgique Contribution de l’UE Aucune donnée Adresse Rue Ernest Solvay, 11 4000 LIEGE Voir sur la carte Coût total Aucune donnée SIDENOR I+D Espagne Contribution de l’UE Aucune donnée Adresse Barrio Ugarte s/n 48970 BASAURI (VIZCAYA) Voir sur la carte Coût total Aucune donnée