Objective This research project shall demonstrate the proper operation of the advanced edge-masking technologies in the hot strip mills to improve flatness at the strip edges. In order to control temperature in the edges of the strip at the ROT, an edge- masking system will be installed. The working positions of this edge-masking device (EMD) will be modelled. A flatness gauge will be installed at the coiler entry, so that the effects of the EMD can be measured. In addition an adaptation module will be developed to correct, from one coil to another, the actual EMD working positions of each group belonging to the ROT exit thermal map. Programme(s) ECSC-STEEL C - Medium-term guidelines for the ECSC steel RTD programme of research and pilot/demonstration projects, 1996-2002 Topic(s) T2 - Continuous casting Call for proposal Data not available Funding Scheme CSC - Cost-sharing contracts Coordinator ACERALIA CORPORACION SIDERURGICA EU contribution No data Address 33480 AVILES (ASTURIAS) Spain See on map Total cost No data Participants (2) Sort alphabetically Sort by EU Contribution Expand all Collapse all Betriebsforschungsinstitut des Verein Deutscher Eisenhüttenleute eV Germany EU contribution No data Address Sohnstraße 65 40237 Düsseldorf See on map Total cost No data SMS-DEMAG Germany EU contribution No data Address Wiesenstraße 30 57271 HILCHENBACH See on map Total cost No data