Cel This research project aims to develop automatic recognition and quantification of flatness defects in water-cooled heavy plate (ACC) on the basis of the plate topology as measured using a laser system after the cooling line. A model for the prediction of plate behaviour will be developed and verified which has been deduced from parameters involving the cooling line, measured plate topology and a physically based deformation model. On the basis of the prediction model, a process control loop for the cooling line will be designed and tested. The implementation of such systems would reduce worker intervention under difficult working conditions. Program(-y) ECSC-STEEL C - Medium-term guidelines for the ECSC steel RTD programme of research and pilot/demonstration projects, 1996-2002 Temat(-y) D2 - Rolling - flat products Zaproszenie do składania wniosków Data not available System finansowania CSC - Cost-sharing contracts Koordynator AKTIEN-GESELLSCHAFT DER DILLINGER HÜTTENWERKE Wkład UE Brak danych Adres 66748 DILLINGEN Niemcy Zobacz na mapie Koszt całkowity Brak danych Uczestnicy (2) Sortuj alfabetycznie Sortuj według wkładu UE Rozwiń wszystko Zwiń wszystko FRAUNHOFER-GESELLSCHAFT ZUR FÖRDERUNG DER ANGEWANDTEN FORSCHUNG Niemcy Wkład UE Brak danych Adres Leonrodstrasse 54 80636 MÜNCHEN Zobacz na mapie Koszt całkowity Brak danych INSTITUT DE RECHERCHES DE LA SIDERURGIE FRANÇAISE Francja Wkład UE Brak danych Adres Voie Romaine - BP 320 57214 MAIZIERES-LES-METZ CEDEX Zobacz na mapie Koszt całkowity Brak danych