Objetivo Increasing demands for product quality in continuous casting of billets, blooms and slabs asks for an improved knowledge of the phenomena that occur at the meniscus in the mold. The overall objective of this project is to develop new methods of investigation in order to have a better insight into the initial solidified shell formation and therefore to identify new casting conditions for the improvement of the products quality. This will be achieved by studying, on the one hand, the interaction between the lubricant (oil or powder) and the solidified shell and, on the other hand, by studying the associated mold process parameters. The main part of the work will consist in simulation test, industrial characterisations and numerical modelling. Programa(s) ECSC-STEEL C - Medium-term guidelines for the ECSC steel RTD programme of research and pilot/demonstration projects, 1996-2002 Tema(s) C3 - Casting and solidification Convocatoria de propuestas Data not available Régimen de financiación CSC - Cost-sharing contracts Coordinador INSTITUT DE RECHERCHES DE LA SIDERURGIE FRANÇAISE Aportación de la UE Sin datos Dirección Immeuble "PACIFIC", La Défense 7 11/13 Cours Valmy 92800 PUTEAUX Francia Ver en el mapa Coste total Sin datos Participantes (4) Ordenar alfabéticamente Ordenar por aportación de la UE Ampliar todo Contraer todo ACERALIA CORPORACION SIDERURGICA España Aportación de la UE Sin datos Dirección 33480 AVILES (ASTURIAS) Ver en el mapa Coste total Sin datos Betriebsforschungsinstitut des Verein Deutscher Eisenhüttenleute eV Alemania Aportación de la UE Sin datos Dirección Sohnstraße 65 40237 Düsseldorf Ver en el mapa Coste total Sin datos CENTRO SVILUPPO MATERIALI SPA Italia Aportación de la UE Sin datos Dirección Via di Castel Romano 100/102 00128 ROMA EUR Ver en el mapa Coste total Sin datos INSTITUT FÜR ENERGIEVERFAHRENSTECHNIK & BRENNSTOFFTECHNIK (IEVB) Alemania Aportación de la UE Sin datos Dirección Agricolastrasse 4 38678 CLAUSTHAL-ZELLERFELD Ver en el mapa Coste total Sin datos