Skip to main content
European Commission logo print header
Content archived on 2022-11-21

Validation of simulation models of dust & gas ventilation for the design & self-control of iron & steelmaking shops

Objective

The project aims at validating, in the field, ventilation techniques using 3D numerical codes for typical iron and steelmaking shops ( blast furnaces, steelmaking plants, coil-coating shops, rolling mills). The main steps foreseen are: choice of numerical codes of interest; choice of typical iron and steelmaking plants; determination, by physical measurements, of the boundary conditions that depend on the situation and the configuration of the shop; computing of the ventilation and validation of the results obtained by physical measurements in the field. It is expected that the results of this project will largely contribute to the improvement of both the technical efficiency of the ventilation systems and, consequently, the salubrity of work places and to the energy/cost efficiency of the ventilation of iron and steelmaking shops.

Call for proposal

Data not available

Coordinator

LECES ENVIRONNEMENT
EU contribution
No data
Address
Voie Romaine - Domaine de l'IRSID
57282 MAIZIERES-LES-METZ
France

See on map

Total cost
No data

Participants (3)