Objectif Since knowledge of the phases of steel (inclusions, nitrides, carbides) is of growing importance to the steel manufacturer and the metallurgist, this research should make it possible, using current laboratory techniques, to develop fast characterization methods for oxide or nitride phases. A substantial proportion of the work will consist in optimising the conditions of thermal decomposition in order to differentiate between the signals obtained and to relate them to the phases present. Various parameters will be studied, such as temperature (rise time, hold time, multiple cycles), nature of the vessels, vector gases.In order to study the influence of thermal programming, two measurement techniques will be applied:1. atomic absorption spectrometry;2. catharometric or infrared detection used in oxygen and nitrogen dosers. The information quickly gathered by these methods will be correlated with the use properties associated with the nature of the phases present. Programme(s) ECSC-STEELRES 7C - Medium-term guidelines (ECSC) "technical steel research", 1986-1990 Thème(s) E2 - Chemical analysis Appel à propositions Data not available Régime de financement CSC - Cost-sharing contracts Coordinateur INSTITUT DE RECHERCHES DE LA SIDERURGIE FRANÇAISE Contribution de l’UE Aucune donnée Adresse 34, rue de la Croix de Fer 78105 PARIS LA DEFENSE France Voir sur la carte Coût total Aucune donnée Participants (2) Trier par ordre alphabétique Trier par contribution de l’UE Tout développer Tout réduire CENTRE DE RECHERCHES D'UNIEUX France Contribution de l’UE Aucune donnée Adresse 42702 FIRMINY CEDEX A Voir sur la carte Coût total Aucune donnée SOLLAC LORRAINE France Contribution de l’UE Aucune donnée Adresse Avenue des Tilleuls 17 57191 FLORANGE CEDEX Voir sur la carte Coût total Aucune donnée