Objectif The project consists in carrying out direct cooling tests on laboratory machines and then on pilot machines of the twin roller type on stainless steel strip, of the grade AISI 304, with a thickness of less than 5 mm. The development of the solidification model and the heat balance model, the assessment of the quality obtained, the identification of the casting conditions necessary to obtain the desired quality with the minimum of subsequent mechanical treatment and heat treatment will be aimed at from the parameters obtained. Programme(s) ECSC-STEELRES 7C - Medium-term guidelines (ECSC) "technical steel research", 1986-1990 Thème(s) C3 - Casting and solidification Appel à propositions Data not available Régime de financement CSC - Cost-sharing contracts Coordinateur CENTRO SVILUPPO MATERIALI SPA Contribution de l’UE Aucune donnée Adresse Via di Castel Romano 100/102 00128 ROMA EUR Italie Voir sur la carte Coût total Aucune donnée