Objetivo The aim of this project is to develop a computerised expert system to assist in the operation of an electric arc furnace of 105 tons capacity and 80MW of installed power at Bergavia Works. In this preliminary phase, the process will be analysed in terms of metallurgical, energy and material balance models. Experience available at BFI (Düsseldorf) will be used to help define the selection procedure for the mathematical models. Programa(s) ECSC-STEELDEM 2C - Programme (ECSC) "pilot and demonstration projects in the iron and steel industry", 1988-1992 Tema(s) T1 - Iron and steelmaking Convocatoria de propuestas Data not available Régimen de financiación DEM - Demonstration contracts Coordinador UNION CERRAJERA Aportación de la UE Sin datos Dirección Fábrica de Mondragón Avenida de Viteri s/n 20500 MONDRAGON (GUIPUZCOA) España Ver en el mapa Coste total Sin datos Participantes (3) Ordenar alfabéticamente Ordenar por aportación de la UE Ampliar todo Contraer todo Betriebsforschungsinstitut des Verein Deutscher Eisenhüttenleute eV Alemania Aportación de la UE Sin datos Dirección Sohnstraße 65 40237 Düsseldorf Ver en el mapa Coste total Sin datos CENTRO NACIONAL DE INVESTIGACIONES METALURGICAS España Aportación de la UE Sin datos Dirección Avenida Gregorio del Amo 8 28040 MADRID Ver en el mapa Coste total Sin datos IDS España Aportación de la UE Sin datos Dirección Paseo Castellana nº 93, 4º Planta 28046 MADRID Ver en el mapa Coste total Sin datos