Skip to main content
European Commission logo print header
Contenido archivado el 2022-11-21

Test method for recording stress and elongation processes at high temperature after previous in situ fusing of test pieces

Objetivo

It has not so far been possible to measure true stress and true elongation on specimens immediately following in-situ melting and resolidification. The values that should be obtainable by this testing method, for example, Young's modulus at elevated temperatures, could be used as input data for mathematical models to calculate the stress distribution and critical elongation during continuous casting. The best available option for plotting the true stress and the elongation could then be calculated on the basis of such measurements.

Convocatoria de propuestas

Data not available

Régimen de financiación

CSC - Cost-sharing contracts

Coordinador

Rheinisch-Westfälische Technische Hochschule Aachen (RWTH)
Aportación de la UE
Sin datos
Dirección
Kopernikusstraße 16
52056 Aachen
Alemania

Ver en el mapa

Coste total
Sin datos