Obiettivo In the framework of the project, it is proposed to set up, on the tundish of a three-strands bloom caster of DELTA COGNE spa in Aosta, a full-scale system for temperature control by means of a plasma torch of 2 MW capacity. The assessment of the parameters concerning heat transmission and fluo-dynamic currents inside the liquid metal will be used to set up a process monitoring model. This project has been fully accepted but, for budgetary reasons, the financial support will be delivered in two parts; the second part can be found in the reserve list in annex II. For industrial programmation reasons the contract will start on the 1st April 1990. Programma(i) ECSC-STEELDEM 2C - Programme (ECSC) "pilot and demonstration projects in the iron and steel industry", 1988-1992 Argomento(i) T2 - Continuous casting Invito a presentare proposte Data not available Meccanismo di finanziamento DEM - Demonstration contracts Coordinatore CENTRO SVILUPPO MATERIALI SPA Contributo UE Nessun dato Indirizzo Via di Castel Romano 100/102 00128 ROMA EUR Italia Mostra sulla mappa Costo totale Nessun dato Partecipanti (2) Classifica in ordine alfabetico Classifica per Contributo UE Espandi tutto Riduci tutto DELTACOGNE Italia Contributo UE Nessun dato Indirizzo Stabilimento di Aosta Via Paravera 16 11100 AOSTA Mostra sulla mappa Costo totale Nessun dato MANNESMANN DEMAG HUTTENTECHNIK Germania Contributo UE Nessun dato Indirizzo Franz-Schubert Strasse 1-3 47226 DUISBURG Mostra sulla mappa Costo totale Nessun dato