Objective Much higher frequencies (max 8Hz) can now be applied to the proposed new mould, due to a 60% weight reduction of the moving parts in combination with resonance effects generated by leaf springs and hydraulic actuators. The hydraulic system also allows non- sinusoidal oscillation to be imparted. The advantages of this system will provide an improvement in the surface quality of continuous cast slabs. Programme(s) ECSC-STEELDEM 3C - Medium-term guidelines (ECSC) for the programmes of technical steel research and of steel pilot/demonstration projects, 1991-1995 Topic(s) T2 - Continuous casting Call for proposal Data not available Funding Scheme CSC - Cost-sharing contracts Coordinator PREUSSAG STAHL EU contribution No data Address Eisenhüttenstrasse, 99 38223 SALZGITTER Germany See on map Total cost No data