Measurement of the rotational capacity of beams and hollow sections

Ziel

Three point bending tests will be used in this research project in order to establish methods of determining the maximum bearing capacity and rotation capacity of hollow section beams, with and without axial loading as a function of loading, dimensions and strength of the material. Investigation has shown that the b/t ratios specified in various codes are based solely on the yield strength. This research will determine whether the conservative conditions adopted for I sections have also to be applied in the case of hollow section beams.

Programm/Programme

ECSC-STEELRES 8C - Medium-term guidelines (ECSC) for the programmes of technical steel research and of steel pilot/demonstration projects, 1991-1995

Thema/Themen

F6 - Steel structures

Aufforderung zur Vorschlagseinreichung

Data not available

Finanzierungsplan

CSC - Cost-sharing contracts

Koordinator

STUDIENGESELLSCHAFT STAHLANWENDUNG

EU-Beitrag

Keine Daten

Adresse

Sohnstrasse 65
40237 DÜSSELDORF
Deutschland

Gesamtkosten