Skip to main content

SHARING EXPERIENCE ON RISK MANAGEMENT (HEALTH, SAFETY AND ENVIRONMENT) TO DESIGN FUTURE INDUSTRIAL SYSTEMS

Objective

SHAPE-RISK aims at optimising the efficiency of integrated risk management in the context of the sustainable development of the European process industry. The proposal addresses sustainable waste management and hazard reduction in production, storage and manufacturing. The main deliverable of the SHAPE-RISK process will be recommendations to design future cleaner and safer industrial systems. These recommendations will be discussed and endorsed by the Industry. And finally an agenda of actions, approved by Industry, will be done. The goal is to support life-cycle safety and minimisation of accident, pollution and emissions, from the producer of raw materials to the end product delivered by the industrial installation. In operational terms, SHAPE-RISK aims at structuring a network with the organisations providing technical support to the Authorities in charge of the SEVESO II, IPPC and ATEX directives. This network organised in a Co-ordination Action will interact with the other stakeholders: Industry, the Public, and representatives of Communities, International Organisation and NGOs. In 3 years, the result of SHAPE-RISK will be an integrated approach of the different components of risk management and the optimisation of the resources devoted to risk control (environment protection and accident prevention). It will be achieved by enhancing synergy between European, national and regional programmes, and also by taking into account the needs of the pre-accession countries. SHAPE-RISK will result in the dissemination of knowledge and in the specification of research activities to address innovative breakthrough that will serve the construction of safer and cleaner industrial systems. SHAPE-RISK then contributes to the integration and reinforcement of the European Research Area in risk prevention.

Call for proposal

FP6-2002-NMP-1
See other projects for this call

Funding Scheme

CA - Coordination action

Coordinator

INSTITUT NATIONAL DE L'ENVIRONNEMENT INDUSTRIEL ET DES RISQUES'
Address
Parc Technologique Alata
BP2 Verneuil En Halatte
France

Participants (18)

COMMISSION OF THE EUROPEAN COMMUNITIES - DIRECTORATE GENERAL JOINT RESEARCH CENTRE
Belgium
Address
200, Rue De La Loi
Bruxelles
RIJKSINSTITUUT VOOR VOLKSGEZONDHEID EN MILIEU
Netherlands
Address
Antonie Van Leeuwenhoeklaan 9
Bilthoven
VTT VALTION TEKNILLINEN TUTKIMUSKESKUS
Finland
Address
Vuorimiehentie 5
1000 Espoo
DANMARKS TEKNISKE UNIVERSITET (TECHNICAL UNIVERSITY OF DENMARK)
Denmark
Address
Anker Engelundsvej 1
Kgs. Lyngby
VYSOKA SKOLA BANSKA - TECHNICKA UNIVERZITA OSTRAVA
Czechia
Address
Av. 17 Listopadu 15
Ostrava
JOZEF STEFAN INSTITUTE
Slovenia
Address
Jamova 39
3000 Ljubljana
ISTITUTO SUPERIORE PER LA PREVENZIONE E LA SICUREZZA DEL LAVORO
Italy
Address
Via Urbana 167
Roma
NEDERLANDSE ORGANISATIE VOOR TOEGEPAST NATUURWETENSCHAPPELIJK
Netherlands
Address
Schoemakerstraat 97
6060 Delft
NATIONAL CENTER FOR SCIENTIFIC RESEARCH "DEMOKRITOS"
Greece
Address
Patriarchou Gregoriou Str.
60228 Aghia Paraskevi
GLOWNY INSTYTUT GORNICTWA
Poland
Address
Plac Gwarkow 1
Katowice
OTTO VON GUERICKE UNIVERSITAET MAGDEBURG
Germany
Address
Universitaetsplatz 2
Magdeburg
UNIVERSITA CA' FOSCARI DI VENEZIA
Italy
Address
Dorsoduro 3246
Venezia
FACULTE POLYTECHNIQUE DE MONS
Belgium
Address
Rue Houdain 9
Mons-bergen
ENVIRONMENT AGENCY
United Kingdom
Address
Rio House, Waterside Drive, Aztec West
Almondsbury, Bristol
BUNDESANSTALT FUER MATERIALFORSCHUNG UND -PRUEFUNG
Germany
Address
Unter Den Eichen 87
Berlin
VLAAMSE INSTELLING VOOR TECHNOLOGISCH ONDERZOEK
Belgium
Address
Boeretang 200
Mol
THE UNIVERSITY OF MANCHESTER
United Kingdom
Address
Oxford Road
Manchester
HEALTH & SAFETY EXECUTIVE
United Kingdom
Address
Rose Court 2 Southwark Bridge
London