Objective The tool wear amount is essentially due to sharpness of die radii, lubrication, surface finish, galling effects, thickness of the forming sheet and severity of the forming operations.The present tribological devices are not always reliable in forecasting the wear forming tool life, due to the difficulty in understanding the correct influence of the numerous parameters involved.This project aims at developing new testing methodologies to predict the wear behaviour of steel tools in the field of cold forming and deep drawing production, by means of correlating experimental data and wear effects from service operations. Programme(s) ECSC-COAL-STEEL-RTD C - Research Programme of the Research Fund for Coal and Steel Topic(s) Data not available Call for proposal Data not available Funding Scheme Data not available Coordinator CENTRO SVILUPPO MATERIALI SPA EU contribution No data Address Via di Castel Romano 100/102 ROMA Italy See on map Total cost No data Participants (4) Sort alphabetically Sort by EU Contribution Expand all Collapse all FUNDACIÓN INASMET Spain EU contribution No data Address Paseo Mikeletegui 2 20009 SAN SEBASTIAN- GUIPUZCOA See on map Links Website Opens in new window Total cost No data GIANETTI RUOTE SPA Italy EU contribution No data Address Via Stabilimenti 31 20020 CERIANO-LAGHETTO See on map Links Website Opens in new window Total cost No data KORROSIONS- OCH METALLFORSKNINGSINSTITUTET AB Sweden EU contribution No data Address Drottning Kristinas väg 48 11428 STOCKHOLM See on map Links Website Opens in new window Total cost No data SIDENOR INVESTIGACION Y DESARROLLO S.A. Spain EU contribution No data Address Barrio Ugarte s/n 48970 BASAURI See on map Links Website Opens in new window Total cost No data
