Objetivo The maximal strength level for a given steel composition can be realised with the martensitic microstructure. However, as-quenched martensite shows some major drawbacks such as low formability and low toughness level. Tempering at a relatively low temperature and/or keeping a certain amount of residual austenite in the microstructure could improve these properties.Furthermore, an additional low temperature galvanising treatment will provide an additional corrosion resistance to the hot rolled high strength strips. This development will allow the production of coated ultrahigh strength hot rolled steel (TS higher than 1000MPa) with superior formability and toughness level. Programa(s) ECSC-COAL-STEEL-RTD C - Research Programme of the Research Fund for Coal and Steel Tema(s) Data not available Convocatoria de propuestas Data not available Régimen de financiación Data not available Coordinador CENTRE DE RECHERCHES METALLURGIQUES ASBL Aportación de la UE Sin datos Dirección Avenue Ariane 5 1200 BRUXELLES Bélgica Ver en el mapa Enlaces Sitio web Opens in new window Coste total Sin datos Participantes (3) Ordenar alfabéticamente Ordenar por aportación de la UE Ampliar todo Contraer todo KORROSIONS- OCH METALLFORSKNINGSINSTITUTET AB Suecia Aportación de la UE Sin datos Dirección Drottning Kristinas väg 48 11428 STOCKHOLM Ver en el mapa Enlaces Sitio web Opens in new window Coste total Sin datos ONDERZOEKSCENTRUM VOOR AANWENDING VAN STAAL N.V. Bélgica Aportación de la UE Sin datos Dirección John Kennedylaan 3 9060 ZELZATE Ver en el mapa Enlaces Sitio web Opens in new window Coste total Sin datos VOESTALPINE STAHL GMBH Austria Aportación de la UE Sin datos Dirección VOEST-ALPINE-Strasse 3 4020 LINZ Ver en el mapa Enlaces Sitio web Opens in new window Coste total Sin datos