CORDIS
EU research results

CORDIS

English EN

Aerodynamic validation of emission reducing

Objective

AVERT will deliver upstream aerodynamics research that will enable breakthrough technology deployment and innovative aircraft configuration development and a step change in aircraft performance. The project will contribute to the need to improve the environmental impact of aircraft emissions and the drive to strengthen the competitiveness of European manufacturing industry The major objective of AVERT is the development and industrialisation of novel active flow control technologies for a realistic configuration to significantly reduce airframe drag and thus engine CO2 emissions. This research responds to a target set in the ACARE 2020 review for a substantial increase in aircraft cruise L/D by realising the full potential of new configurations such as the "Pro Green" aircraft. Active flow control technology can attack the two main sources of aircraft drag (profile and vortex drag) directly, by reducing skin friction drag, and indirectly by unlocking traditional configuration constraints on aircraft design and alter the focus of many design rules. It is predicted that the combined drag reduction could be up to 10% and an equivalent reduction in emissions. The achievement of the objective will give the aircraft makers within AVERT confidence that emerging flow control technologies can be industrialised to the point of practical and beneficial application to an aircraft operating in a commercial environment. The objectives will be achieved through the evaluation of selected types of device and control system, the assessment of these technologies against two baseline aircraft configurations and the validation of the most promising technologies through large scale wind tunnel testing at appropriate flight conditions. The project consortium consists of 16 organisations from 8 different countries whose researchers have significant experience in the areas of aircraft design, flow control technology, MEMS devices and wind tunnel testing.

Leaflet | Map data © OpenStreetMap contributors, Credit: EC-GISCO, © EuroGeographics for the administrative boundaries

Coordinator

AIRBUS OPERATIONS LIMITED

Address

New Filton House
Bristol

United Kingdom

Administrative Contact

Norman WOOD (Dr)

Participants (14)

Sort alphabetically

Expand all

AIRBUS OPERATIONS S. L.

Spain

EADS DEUTSCHLAND GMBH CORPORATE RESEARCH CENTER GERMANY

Germany

DEUTSCHES ZENTRUM FÜR LUFT- UND RAUMFAHRT E.V.

Germany

NATIONAL INSTITUTE FOR AEROSPACE RESEARCH "ELIE CARAFOLI"

Romania

OFFICE NATIONAL D?ETUDES ET DE RECHERCHES AÉROSPATIALES

France

PARAGON S.A.

Greece

VYZKUMNY A ZKUSEBNI LETECKY USTAV, A.S.

Czechia

TECHNISCHE UNIVERSITÄT BERLIN

Germany

CENTRE NATIONAL DE LA RECHERCHE SCIENTIFIQUE

France

UNIVERSIDAD POLITÉCNICA DE MADRID

Spain

THE UNIVERSITY OF MANCHESTER

United Kingdom

UNIVERSITY OF NOTTINGHAM

United Kingdom

ALENIA AERONAUTICA S.P.A

Italy

DASSAULT AVIATION

France

Project information

Grant agreement ID: 30914

  • Start date

    1 January 2007

  • End date

    30 June 2010

Funded under:

FP6-AEROSPACE

  • Overall budget:

    € 6 749 869

  • EU contribution

    € 3 899 932

Coordinated by:

AIRBUS OPERATIONS LIMITED

United Kingdom