Objetivo The Joint European Printer Server (JEPS) project was intended to be the basis for developing the necessary technologies needed to meet the competitive requirements of the medium- to high-speed printer market in the 1990s. It is also intended to promote standards in the area of interfaces and protocols suitable for high-performance multicolour printers, and to accelerate, by up to two years, the release of new products that will constitute the cornerstone of the new generation of mid-range printers.The joint European printer server (JEPS) project is intended to be the basis for developing the necessary technologies needed to meet the competitive requirements of the medium speed to high speed printer market in the 1990s. It is also intended to promote standards in the area of interfaces and protocols suitable for high performance multicolour printers, and to accelerate, by up to 2 years, the release of new products that will constitute the cornerstone of the new generation of mid range printers.The PREJEPS project is focussed on the specifications and preliminary studies of a printer server, to be inserted in various systems and network environments, capable of driving several different existing or new printers.This server includes a printer server itself, an adaptable printer imager, and 2 printer devices based on 2 different technologies developed in Europe. These technologies had already proved their feasibility in different speed ranges: a high speed printer of 100 ppm with multicolour capability and medium to high resolution, and a medium speed printer of 40 to 80 ppm with bicolour capability and high resolution.The adaptable imager study covered the requirements of a family of printer engines, starting with the 2 mentioned above and followed by engines characterized by adaptability in the 20 to 100 ppm speed range and up to 600 dots per inch resolution with colour and grey scale capability.The PREJEPS project is focused on the specifications and preliminary studies of a printer server, to be inserted in various systems and network environments, capable of driving several different existing or new printers. This server includes a printer server itself, an adaptable printer imager, and two printer devices based on two different technologies developed in Europe. These technologies had already proved their feasibility in different speed ranges: - a high-speed printer of 100 ppm with multicolour capability and medium to high resolution - a medium-speed printer in of 40-80 ppm with bicolour capability and high resolution. The adaptable imager study covered the requirements of a family of printer engines, starting with the two mentioned above and followed by engines characterised by adaptability in the 20-100 ppm speed range and up to 600 dpi resolution with colour and grey-scale capability. Ámbito científico engineering and technologymaterials engineeringcolors Programa(s) FP2-ESPRIT 2 - European strategic programme (EEC) for research and development in information technologies (ESPRIT), 1987-1992 Tema(s) Data not available Convocatoria de propuestas Data not available Régimen de financiación Data not available Coordinador Bull SA Aportación de la UE Sin datos Dirección Tour Bull 1 place Carpeaux Puteaux 92039 Paris la Défense Francia Ver en el mapa Coste total Sin datos Participantes (2) Ordenar alfabéticamente Ordenar por aportación de la UE Ampliar todo Contraer todo OCE NEDERLAND Países Bajos Aportación de la UE Sin datos Dirección ST. URBANUSSTRAAT, 43, 101 5900 MA VENLO Ver en el mapa Coste total Sin datos SIEMENS AG Alemania Aportación de la UE Sin datos Dirección Wittelsbacherplatz 80333 MUENCHEN Ver en el mapa Coste total Sin datos
