Cel Problem: Minimizing the temperature of Building Integrated PV to increase electrical output. It is estimated that an average BIPV cell operates at a temperature of up to 10 degrees C above that which could be achieved by better informed design. This represents a loss of performance of up to 5% of power produced, as well as increasing thermal cycling stresses and ageing processes. In a European context, where 10MWp BIPV is projected to be installed annually, this represents a loss of 500KWp capacity, or around 500MWh/year of electricity generated. Cause: Designers not aware of how PV modules/laminates exchange heat with their surroundings, and therefore cannot take the operating temperature into account when designing their system. Dziedzina nauki engineering and technologycivil engineeringarchitecture engineeringsustainable architecturesustainable building Program(-y) FP5-EESD - Programme for research, technological development and demonstration on "Energy, environment and sustainable development, 1998-2002" Temat(-y) Data not available Zaproszenie do składania wniosków Third Call - 31 Zobacz inne projekty w ramach tego zaproszenia System finansowania Data not available Koordynator ENERGY EQUIPMENT TESTING SERVICE LTD. Wkład UE Brak danych Adres Unit2 glan-y-llyn- Industrial Estate. Cardiff road TAFFS-WELL Zjednoczone Królestwo Zobacz na mapie Koszt całkowity Brak danych Uczestnicy (3) Sortuj alfabetycznie Sortuj według wkładu UE Rozwiń wszystko Zwiń wszystko BEAR ARCHITECTEN BV Niderlandy Wkład UE Brak danych Adres Gravin Beatrixstraat 34 - 349 GOUDA Zobacz na mapie Koszt całkowity Brak danych CENTRE FOR BUILT ENVIRONMENT Szwecja Wkład UE Brak danych Adres 3 SOEDRA SJOETULLSGATAN GÄVLE Zobacz na mapie Koszt całkowity Brak danych GEOSALAR ENERGIE-UND UMWELTSYSTEME GMBH Niemcy Wkład UE Brak danych Adres Bahnhofstrasse 34 - 1219 WEDEL Zobacz na mapie Koszt całkowity Brak danych