Skip to main content
European Commission logo print header

Cost Effective Reinforcement of Fastener Areas in Composites

Objectif

CERFAC’s major challenge is the design and manufacturing of strong and cost-efficient joints for high performance CFRP aero-structures.

In particular, transfer of distributed loading along rivets lines in the assembly of flat or curved thin-walled stiffened panels, and introduction of concentrated loads for connecting lugs with thicker laminates are special & frequent problems. Hence, CERFAC focuses on applications with significant volume and occurrence (butt straps & splices, orbital and longitudinal multi-functional joints, single and multiple bolts attachments), such that an increase of the strength to cost ratio of joints could lead to overall significant cost and weight savings.

In this frame, CERFAC’s high level objectives are
• To increase the strength to cost ratio and damage tolerance of fastener areas in CFRP structures without weight, thickness and stiffness penalty
• To reduce the number or fasteners (10 to 100% reduction), the local thickening of fastener areas and minimize the manufacturing & assembly costs (20% reduction).

This will be achieved thanks to advanced and rigorous research & development activities with the following major deliverables and outputs:
• A catalogue of validated reinforcement solutions at the locus of fastener holes or edges leading to lighter, stronger and more damage tolerant designs.
• Innovative and efficient joining concepts combining some of the investigated reinforcement solutions. This contribution would then help reducing further the number of fasteners, while increasing the load bearing capacity and damage tolerance of the assembly, with a significant step towards a reduced manufacturing cost. Repair and disassembly will be considered as mandatory requirements in this second contribution.
• Upgraded design, analysis and testing methodologies as well as pragmatic guidelines for future exploitation of the new concepts in the next generation aircrafts.

Appel à propositions

FP7-AAT-2010-RTD-1
Voir d’autres projets de cet appel

Coordinateur

CENTRE DE RECHERCHE EN AERONAUTIQUE ASBL - CENAERO
Contribution de l’UE
€ 460 592,00
Adresse
Batiment Eole, 1er étage - rue des Frères Wright 29
6041 Gosselies
Belgique

Voir sur la carte

Région
Région wallonne Prov. Hainaut Arr. Charleroi
Type d’activité
Research Organisations
Liens
Coût total
Aucune donnée

Participants (14)