Skip to main content
European Commission logo print header

Thermosetting resin for Clean Sky

Cel

Within the Clean Sky JTI, the use of a nanocomposite material for primary structures of a Green Regional Aircraft is going to be thoroughly studied and analysed. The nano-filler modified matrix have a great potential to exhibit high performance in terms of thermal, mechanical and electrical properties. The modified resins should able to be used in the prepreg route for composite fabrication, which means that the uncured resin must exhibits proper rheological properties and dispersion in liquid phase compatible with the impregnation of dry fiber fabrics. The objective of AIT is to manufacture nanomodified resins to fulfil the requirements of the Clean Sky roadmap. In a first step, nanoparticles will be selected among 1D (needle shape like carbon nanotubes or nanofibres), 2D (plate shape like nanoclays) and 3D (ball shape like Al2O3, ZrO2, or Boehmite) geometries. Then AIT will benefit of its experience in nanotechnology to set-up the dispersion methods, to produce batches of modified resin (12 different types are planed), to set up the curing parameter, to produce samples and finally, to characterize them. The proposed test campaign will investigate the chemical, physical, morphological, rheological, thermal, mechanical and electrical properties. The dissemination and exploitation of the result will be assure by the management Team in close communication and collaboration with the ITD leaders and other CS-RTD partners.

Zaproszenie do składania wniosków

SP1-JTI-CS-2009-01
Zobacz inne projekty w ramach tego zaproszenia

Koordynator

AIT AUSTRIAN INSTITUTE OF TECHNOLOGY GMBH
Wkład UE
€ 74 250,00
Adres
GIEFINGGASSE 4
1210 Wien
Austria

Zobacz na mapie

Region
Ostösterreich Wien Wien
Rodzaj działalności
Research Organisations
Kontakt administracyjny
Felix Schröpfer (Mr.)
Linki
Koszt całkowity
Brak danych