Skip to main content
European Commission logo print header

Advanced Lattice Structures for Composite Airframes

Obiettivo

The ALaSCA project focuses on maximum weight and cost reduction significant in airframes by developing manufacture-optimized lattice fuselage structures fulfilling fundamental aspects of airworthiness.
The idea behind the ALaSCA project is to perform a comprehensive investigation starting with the beneficial geodesic design well-proven in space technology and transferring it to composite aircraft fuselage designs. The main objectives of this research programme are: a) Maximum weight and cost reduction by using lattice designs for fuselage structures. b) Development of manufacture-optimized lattice designs satisfying airworthiness requirements. c) Verification of airworthiness by manufacture and testing of representative lattice components.

Since structural requirements and boundary conditions in rocket technology are quite different from those in aircraft fuselage design, the scope of this project covers the specific aspects of design, sizing, manufacture and testing of lattice structures that follow from aircraft requirements. The objectives will only be achieved when solutions to the following issues in terms of lay-out, design, sizing, manufacture, and testing are found: a) Pro-lattice aircraft configurations for maximum weight and cost savings b) Aircraft specific components treated in the lattice fuselage design. c) Lattice elements, i.e. examination in the aircraft-specific detailed design of loads from impact and internal pressure.

Applying the above-mentioned methodology, the objectives will be achieved by main innovations in the following areas: a) Structural concepts for long service-life periods b) Design and dimensioning of cut-out surround structures c) Optimized floor-barrel interface. d) Barrel-barrel interface. e) Aircraft configurations reducing the demand for large cut-outs and interfaces in lattice fuselage sections. f) Process chain: preliminary design, sizing, detailed design, manufacturing, testing, validation, cost and weight analysis.

Invito a presentare proposte

FP7-AAT-2010-RTD-RUSSIA
Vedi altri progetti per questo bando

Coordinatore

DEUTSCHES ZENTRUM FUR LUFT - UND RAUMFAHRT EV
Contributo UE
€ 513 641,00
Indirizzo
LINDER HOHE
51147 Koln
Germania

Mostra sulla mappa

Regione
Nordrhein-Westfalen Köln Köln, Kreisfreie Stadt
Tipo di attività
Research Organisations
Contatto amministrativo
Felicitas Kutz (Mrs.)
Collegamenti
Costo totale
Nessun dato

Partecipanti (12)