Obiettivo The objective of this proposal is to support Liebherr Aerospace in building up an A320 slat equipped with an electro-thermal solution for wing ice protection system. First step will be to define the top level requirementsto be mutually agreed with Liebherr and Airbus. This will be followed by a technological developments phase to evaluate solutions complying with Liebherr and Airbus’s criteria and integrating electrical components in a hybrid lay-up using advanced composite and metallic materials. A technological demonstrator will conclude this activity to freeze manufacturing process and tooling concept. Heating configuration and control strategy will then be defined in collaboration with Liebherr and assessed through an icing wind tunnel test campaign in order to confirm ice protection performances and system efficiency predicted by numerical simulations. Finally, the system architecture will be optimized for 3 different functional modes (A/I only, combined A/I & D/I, and a mode based on power regulation only (External cooling rate survey)). The 3 optimized architecture concepts performances will then be validated through a full scale IWT campaign, for which 3 demonstrators will be designed, manufactured and tested. Final assessment will be done and, even if performance analysis and relevance of an electro-thermal ice protection system is the main purpose of SONACA’s proposal, structural requirements will be briefly considered in order to evaluate viability of considered solutions for potential further research and technological developments. SONACA will use its experience in aircraft system and structure developments to assess developed solutions according to both points of view. The main objective is to imagine what could be the best compromise between system and structural functionalities that could not be reached without a strong integration of them. If conclusive, advice and recommendations will then be provided to give directions for next phases aiming to an increase of technical readiness level of the whole concept. Campo scientifico engineering and technologymechanical engineeringvehicle engineeringaerospace engineeringaircraft Programma(i) FP7-JTI - Specific Programme "Cooperation": Joint Technology Initiatives Argomento(i) JTI-CS-2009-1-SGO-02-004 - Development and manufacturing of an Electro-thermal Ice Protection Assembly Invito a presentare proposte SP1-JTI-CS-2009-01 Vedi altri progetti per questo bando Meccanismo di finanziamento JTI-CS - Joint Technology Initiatives - Clean Sky Coordinatore SOCIETE NATIONALE DE CONSTRUCTION AEROSPATIALE SONACA SA Contributo UE € 737 500,00 Indirizzo ROUTE NATIONALE CINQ PARK INDUSTRIEL 6041 Gosselies Belgio Mostra sulla mappa Regione Région wallonne Prov. Hainaut Arr. Charleroi Tipo di attività Private for-profit entities (excluding Higher or Secondary Education Establishments) Contatto amministrativo Emmanuelle Paquay (Mrs.) Collegamenti Contatta l’organizzazione Opens in new window Sito web Opens in new window Costo totale Nessun dato
