Objectif With this proposal, a Modelica library for thermodynamic properties of gases and liquids that are used as working media in aircraft, and an Excel interface to the same functions with plotting capabilities for typical thermodynamic design diagrams (Temperature-Entropy and Enthalpy-Entropy) shall be developed. It is important that the complete temperature and pressure range experienced by aircraft is covered, from -60 deg Celsius to 200 deg Celsius, depending on the fluid. The pressure range depends on the fluid, as an example a range from 150 to 1100 hPa is necessary for air. Currently available model libraries don't cover the complete range.A fixed starting date of August 1st was chosen to align the project with the original planning of the ITD activities. Champ scientifique engineering and technologymechanical engineeringvehicle engineeringaerospace engineeringaircraft Programme(s) FP7-JTI - Specific Programme "Cooperation": Joint Technology Initiatives Thème(s) JTI-CS-2009-2-ECO-02-002 - Thermo physical Properties Library for Relevant Fluids Appel à propositions SP1-JTI-CS-2009-02 Voir d’autres projets de cet appel Régime de financement JTI-CS - Joint Technology Initiatives - Clean Sky Coordinateur MODELON AB Contribution de l’UE € 60 000,00 Adresse IDEON SCIENCE PARK 22370 Lund Suède Voir sur la carte Région Södra Sverige Sydsverige Skåne län Type d’activité Private for-profit entities (excluding Higher or Secondary Education Establishments) Contact administratif Jonas Eborn (Dr.) Liens Contacter l’organisation Opens in new window Site web Opens in new window Coût total Aucune donnée