Community Research and Development Information Service - CORDIS

Horizon 2020 project information and now also report summaries are available on CORDIS. All H2020 projects can be downloaded from the EU Open Data Portal .

My refinements

Download results of this page

Refine by:

Content type

Project (76)
Report Summary (6)


Belgium (11)
France (17)
Germany (20)
Italy (5)
Luxembourg (5)
Netherlands (6)
Spain (5)
United Kingdom (13)

Advanced search

Search projects and results

Results 1 - 10 of 82
12 3 4 5 6 7 8 9 > 
ID: 7249/11/015
Start date: 1986-10-01, End date: 1989-06-01
Aims of research: To design a robotized system suited to the different configurations and locations of long-product handling operations, capable of solving the specific problems arising from the handling of such products : high noise levels, uncomfortable postures, risk of a...
Programme: ECSC-ERGONOM 5C
Record Number: 16633
Last updated on: 1993-12-08
Two methods for predicting signal audibility were compared on the basis of theoretical and laboratory analyses, and on site direct measurement of audibility using steelworks operatives and typical steelworks noise. Problems associated with existing sets of signals developed. ...
Programme: ECSC-ERGONOM 5C
Record Number: 8526
Last updated on: 1998-02-05
The work performed by battery workers, machine operators and heating controllers was analysed. The systematic analysis made it possible to: describe actual operating modes and to assess deviations from the prescribed operating mode which affect workers' exposure to risks; id...
Programme: ECSC-ERGONOM 5C
Record Number: 20192
Last updated on: 1998-03-25
Ergonomic and technical measures for the prevention of biomechanical risks in the ladle bay in a steelworks were analysed. Over 20 recommendations for risk reduction, job improvement and stress constraint elimination were developed and implemented. Load handling was improved ...
Programme: ECSC-ERGONOM 5C
Record Number: 8576
Last updated on: 1998-01-15
The design principles of underground protective cabins were examined at workplaces where control and communication tasks are carried out. Requirement for new protective cabins at stationary workplaces underground and the shortcomings of previous protective measures were establ...
Programme: ECSC-ERGONOM 5C
Record Number: 8552
Last updated on: 1998-03-10
Appraisal of existing situation involved interviewing of 62 cabin operators and analysing 8 control cabins constructed within the last 2 years. The aspects studied were: cabin appearance; working posture; control panels; screens; physical environment; social environment. For ...
Programme: ECSC-ERGONOM 5C
Record Number: 8550
Last updated on: 1998-01-26
An expert system has been developed to design underground lighting systems, taking into account ergonomic and cost considerations. Relationships influencing the type of fitting, location and arrangement can be determined for each individual case, and the effects of changes in ...
Programme: ECSC-ERGONOM 5C
Record Number: 8581
Last updated on: 1998-03-12
ID: 7249/11/007
Start date: 1986-01-01, End date: 1987-12-01
Aim of project: To produce ergonomics guidelines and specific design solutions in the area of software ergonomics for implementation within software used for the surface monitoring of shearers with automated vertical guidance systems.
Programme: ECSC-ERGONOM 5C
Record Number: 16629
Last updated on: 1993-12-08
ID: 7249/13/049
Start date: 1988-10-01, End date: 1991-09-30
Aims of the project: Improving auditory communications within steelworks with particular reference to developing guidelines for the selection of auditory signal sets for use in areas of high noise.
Programme: ECSC-ERGONOM 5C
Record Number: 16611
Last updated on: 1993-12-08
ID: 7249/12/036
Start date: 1988-10-01, End date: 1990-09-30
Aim of project: To apply a wide range of ergonomic methods and techniques to the design of roof bolting machines and to facilitate their safe implementation in UK coal mining.
Programme: ECSC-ERGONOM 5C
Record Number: 16582
Last updated on: 1993-12-08
12 3 4 5 6 7 8 9 > 
List retrieved on: 2018-11-19
Follow us on: RSS Facebook Twitter YouTube Managed by the EU Publications Office Top