Community Research and Development Information Service - CORDIS

Horizon 2020 project information and now also report summaries are available on CORDIS. All H2020 projects can be downloaded from the EU Open Data Portal .

My refinements


Download results of this page


Refine by:

Content type

Project (117)

Advanced search

Search projects and results

Results 1 - 10 of 117
Results/page:
12 3 4 5 6 7 8 9 10 > >| 
ID: 7210-PR/022
Start date: 1997-07-01, End date: 2000-12-31
This project is aimed at improving reheat furnace control using the feedback of process measurements available on a routine basis. The primary objective of the project is to develop and demonstrate the methodology required for an effective reheat furnace control system to impr...
Programme: ECSC-STEEL C
Record Number: 66748
Last updated on: 2002-12-13
ID: 7210-PR/216
Start date: 2000-07-01, End date: 2003-12-31
Shape and residual stresses of the cold coil directly from the hot mill is usually not satisfactory for shape critical direct sales, although the shape has been measured flat at the exit of the finishing mill. The aim of this project is to develop a strategy for cooling, strip...
Programme: ECSC-STEEL C
Record Number: 66476
Last updated on: 2002-12-13
ID: 7210-PR/315
Start date: 2001-07-01, End date: 2003-12-31
Steel or composite beams with large openings through the webs of the steel sections are commonly used and large service ducts are passed through the openings. The integration of services within the beam depth is important in order to minimise the floor zone in long span constr...
Programme: ECSC-STEEL C
Record Number: 66574
Last updated on: 2002-12-13
ID: 7215-PP/059
Start date: 2001-07-01, End date: 2003-12-31
In the pilot/demonstration project the technology of the injection of reducing gas into the blast furnace is developed and injection rates are maximised. The goal is to achieve a specific injection rate of 330 Nm³/tHm reducing gas, which is an increase of 20% when compared to ...
Programme: ECSC-STEEL C
Record Number: 66664
Last updated on: 2002-12-13
ID: 7210-PR/304
Start date: 2001-07-01, End date: 2004-06-30
The aim of this project is to improve the deep drawability by controlling of the austenite stability, the strain hardening behaviour, the texture and the surface topography in order to enable new applications for austenitic steels, e.g. in the automotive industry.
Programme: ECSC-STEEL C
Record Number: 66563
Last updated on: 2002-12-13
ID: 7210-PR/318
Start date: 2001-07-01, End date: 2004-06-30
The objective of the project is to develop comprehensive design rules suitable for structural elements made from cold worked stainless steel. The overall objective will be achieved by generating test results on commonly used materials grades at a range of cold worked strength ...
Programme: ECSC-STEEL C
Record Number: 66577
Last updated on: 2002-12-13
ID: 7215-PP/045
Start date: 2000-07-01, End date: 2003-12-31
Control of steel delivery to the casting mould is critical to ensure the stability of the meniscus and satisfactory mould flow patterns, which in turn are determinant of steel cleanness and surface quality. The aims of the project are to develop real-time techniques to visuali...
Programme: ECSC-STEEL C
Record Number: 66651
Last updated on: 2002-12-13
ID: 7210-PR/345
Start date: 2002-07-01, End date: 2005-06-30
The main aim of the present work is to develop carbide-free steels with high strength (>950MPa) and high toughness in low carbon steels, microalloyed predominantly with Ti, using controlled rolling followed by multi-stage cooling processes. Likewise, higher carbon contents (~0...
Programme: ECSC-STEEL C
Record Number: 66604
Last updated on: 2002-12-13
ID: 7210-PR/213
Start date: 2000-07-01, End date: 2003-12-31
The project investigates the precipitation of nitrides and carbides at the early stages of solidification cooling. The physical properties and the microstructures of steels are controlled by precipitate particles. Effects of casting and cooling conditions on their formation wi...
Programme: ECSC-STEEL C
Record Number: 66473
Last updated on: 2002-12-13
ID: 7210-PR/307
Start date: 2001-07-01, End date: 2003-12-31
In this proposal a unique approach is chosen by the optimisation and adaptation of the stainless steel forming system as a whole with environmental and social benefits. Careful development steps are proposed in producing sheet finish, lubricant formulation and tool steel selec...
Programme: ECSC-STEEL C
Record Number: 66566
Last updated on: 2002-12-13
12 3 4 5 6 7 8 9 10 > >| 
List retrieved on: 2018-11-14
Follow us on: RSS Facebook Twitter YouTube Managed by the EU Publications Office Top