Community Research and Development Information Service - CORDIS

Horizon 2020 project information and now also report summaries are available on CORDIS. All H2020 projects can be downloaded from the EU Open Data Portal .

My refinements


Download results of this page


Refine by:

Content type

Project (469)
Result in Brief (35)
Report Summary (174)

Country

Austria (16)
Belgium (117)
Denmark (79)
Finland (11)
France (349)
Germany (389)
Greece (103)
Iceland (1)
Ireland (48)
Italy (293)
Luxembourg (1)
Netherlands (122)
Norway (12)
Portugal (64)
Spain (149)
Sweden (50)
Switzerland (31)
United Kingdom (343)

Advanced search

Search projects and results

Results 1 - 10 of 678
Results/page:
12 3 4 5 6 7 8 9 10 > >| 
ID: BRE20143
Start date: 1992-10-01, End date: 1995-09-30
Simulation tools for the pre-heating, press forming and post-cooling analysis of pre-consolidated CFRTP sheets have been developed and industrially validated. The key capabilities of the software include: Pre-heating analysis: This covers the heating prediction for the proje...
Programme: FP3-BRITE/EURAM 2
Record Number: 6695
Last updated on: 1993-06-28
ID: BRE20153
Start date: 1992-11-01, End date: 1996-10-31
ONERA has completed the microstructural investigations on the 2650 type alloys tested in task 1. These results propose an interesting interpretation of the relationship between microstructure and creep properties as a function of chemical composition, more particularly in reg...
Programme: FP3-BRITE/EURAM 2
Record Number: 6689
Last updated on: 1993-06-28
ID: BRE20608
Start date: 1994-01-01, End date: 1996-12-31
The results of the present project confirmed that electroplating is a suitable technique for manufacturing CMA materials. The two main principles for electrodeposition of CMA coatings - the dual bath and the single bath techniques - exist in a number of variations which can b...
Programme: FP3-BRITE/EURAM 2
Record Number: 22817
Last updated on: 1994-09-19
ID: BRE20316
Start date: 1993-02-01, End date: 1996-05-31
The advantages of 3D shallow high resolution seismic reflection methods have been favorable compared against conventional 2D high resolution and 2D MiniSosie seismic data, as well as in the Hengelo solution mine as in the mine of Belvedere Spinello. Successful application in ...
Programme: FP3-BRITE/EURAM 2
Record Number: 6634
Last updated on: 1993-02-26
ID: BRE20172
Start date: 1992-09-01, End date: 1995-02-28
In tunnelling construction, fast setting shotcrete is applied as a security lining before the load bearing lining of cast-in-place concrete is inserted. This economical construction method has a number of serious drawbacks. The aim of the scientific research is to develop a sh...
Programme: FP3-BRITE/EURAM 2
Record Number: 6571
Last updated on: 1994-11-02
ID: BRE20270
Start date: 1993-01-01, End date: 1995-12-31
The achievements so far are the development and validation of seven in-situ test techniques. Five of the test techniques demonstrate capability of detecting failure mechanisms at 48 hours with moderate tress conditions and 50% of the in-situ test results obtained at 48 hors o...
Programme: FP3-BRITE/EURAM 2
Record Number: 6605
Last updated on: 1993-02-26
Polymers have been synthesized by the ring-opening polymerization of beta-butyrolactones or cyclic anhydrosulphites. Both the homopolymers and copolymers of these monomers with caprolactone or valerolactone have been prepared and characterized for use as potential biodegradabl...
Programme: FP3-BRITE/EURAM 2
Record Number: 19098
Last updated on: 1997-08-19
Reasarch was carried out in order to quantify the performance of an active control system which minimizes structural power input, in comparison with conventional active control methods. The main conclusions derived from the evaluation of the control strategies were as follows;...
Programme: FP3-BRITE/EURAM 2
Record Number: 19033
Last updated on: 2013-01-24
New, plasma based technologies have been developed for sub-micron sized powder engineering. The size and the structure of highly monodisperse particles are engineered by using an appropriate control and modification of the plasma chemistry during or after the particles growth ...
Programme: FP3-BRITE/EURAM 2
Record Number: 20498
Last updated on: 1998-06-24
Research was aimed at the application of diamond film technology to cemented carbide materials. In particular two important applications are being developed to improve the wear resistance of cemented carbide choke trim components and cutting tools. The choke trim components ar...
Programme: FP3-BRITE/EURAM 2
Record Number: 19957
Last updated on: 2001-06-29
12 3 4 5 6 7 8 9 10 > >| 
List retrieved on: 2018-11-12
Follow us on: RSS Facebook Twitter YouTube Managed by the EU Publications Office Top