Community Research and Development Information Service - CORDIS

Horizon 2020 project information and now also report summaries are available on CORDIS. All H2020 projects can be downloaded from the EU Open Data Portal .

My refinements


Download results of this page


Refine by:

Advanced search

Search projects and results

Results 1 - 10 of 118
Results/page:
12 3 4 5 6 7 8 9 10 > >| 
Production Flexibility and Efficiency through Simultaneous Three Axis Turning
ID: 605717
Start date: 2013-11-01, End date: 2015-10-31
In manufacturing of industrial parts, turning is one of the most important manufacturing processes and is applied mainly by SMEs. However, until today, turning processes suffer from inflexible machine characteristics, as to mention an extreme high amount of needed tool holder...
Programme: FP7-SME
Record Number: 110893
Last updated on: 2016-03-31
Water Network Sensors for Widespread Use
ID: 605802
Start date: 2013-09-01, End date: 2016-02-29
Widesens aims to design and develop a prototype analytical drinking water probe and its complementary applications for in-pipe water quality measurement with ideal specifications for a wide deployment. These sensors will be based on microelectronic technologies (ISFET, IDEs a...
Programme: FP7-SME
Record Number: 109491
Last updated on: 2016-12-12
CoeLux: the sky light reconstruction in artificial illumination by means of solid transparent nanocomposites
ID: 262539
Start date: 2010-12-01, End date: 2012-11-30
The quality of artificial illumination is a major concern in modern society, where living conditions often deprive us of the comfort of natural light. The global replacement of incandescent with fluorescent or white-LED lighting, foreseen owing to energy-saving constrain, wil...
Programme: FP7-SME
Record Number: 98534
Last updated on: 2017-05-26
INNOVATIVE SYSTEMS FOR EARTHQUAKE RESISTANT MASONRY ENCLOSURES IN RC BUILDINGS
ID: 606229
Start date: 2013-10-01, End date: 2016-12-31
The project aims at developing innovative systems for masonry enclosures, to be used for façades, envelopes and internal partitions of reinforced concrete framed buildings, to derive sound concepts for their analysis and to develop reliable, simple and efficient methods for t...
Programme: FP7-SME
Record Number: 110090
Last updated on: 2016-07-18
Implant Direct
[PROJECT] Implant Direct - Implant Direct
ID: 286577
Start date: 2012-09-01, End date: 2014-08-31
ImplantDirect will create a cost-effective, faster manufacturing route for orthopaedic, maxillofacial or trauma implants, tailored to the individual needs of patients. The overall project aims are to improve the quality of the implants, reduce the recovery time, improve the q...
Programme: FP7-SME
Record Number: 104802
Last updated on: 2016-03-18
Ash Ingestion Detection Apparatus for aircraft
ID: 304788
Start date: 2013-01-01, End date: 2014-12-31
Aircraft frequently encounter volcanic ash when airborne. In the aftermath of these encounters, virtually the entire fuselage of an aircraft can be contaminated with ash, necessitating a thorough cleaning of the cockpit, instrument panel, circuit breaker panels, passenger and...
Programme: FP7-SME
Record Number: 106810
Last updated on: 2016-02-18
Development of an Automatic harvesting System for white and violet Asparagus
ID: 222137
Start date: 2008-10-01, End date: 2010-09-30
There is considerable demand from industry – both from the asparagus industry and the food retail trade – for the development of new and innovative solutions allowing a gentle, automatic harvesting of asparagus. To meet the requirements, the aim of AutoSpar is the development...
Programme: FP7-SME
Record Number: 94046
Last updated on: 2017-05-29
Advanced Microwave Plasma Gasification of pig and cow manure for cost-effective biogas generation
ID: 315604
Start date: 2012-09-01, End date: 2014-08-31
"The livestock sector in Europe is facing a problem: The manure it generates cannot all be used as fertiliser because excessive amounts of manure to land can lead to surface and ground water contamination through the accumulation of minerals in the soil, as manure contains hi...
Programme: FP7-SME
Record Number: 104546
Last updated on: 2015-10-15
Final Report Summary - AUTOINSPECT (Automated inspection for sintered parts by non-destructive techniques for improved quality in production)
Executive Summary:Powder Metallurgy (PM) parts are typically intricate and complex in shape, produced in near net shape by compaction of powders into the required geometry (i.e. green state), followed by sintering of the compacts for consolidation (i.e. sintered state), where...
Programme: FP7-SME
Record Number: 153766
Last updated on: 2014-12-12
Automated inspection of sintered parts
Non-destructive testing (NDT) is critical to the manufacture of high-quality components without the need to stop production or destroy components during evaluation. Producers of metal parts from powders now have this previously lacking capability.
Programme: FP7-SME
Record Number: 147178
Last updated on: 2014-09-09
Available languages: DE, EN, ES, FR, IT, PL
12 3 4 5 6 7 8 9 10 > >| 
List retrieved on: 2018-12-16
Follow us on: RSS Facebook Twitter YouTube Managed by the EU Publications Office Top