Community Research and Development Information Service - CORDIS

Horizon 2020 project information and now also report summaries are available on CORDIS. All H2020 projects can be downloaded from the EU Open Data Portal .

My refinements


Download results of this page


Refine by:

Programme

FP6
All
FP6-IST (2)
FP5
All
FP5-GROWTH (11)
FP5-IST (1)

Advanced search

Search projects and results

Results 1 - 10 of 14
Order by: Results/page:
12 > 
Final Report Summary - I-SAMCO (International Structural Assessment Monitoring and Control)
The I-SAMCO project was successfully launched in 2001. Its objective was to create knowledge communities within the field of structural assessment monitoring and control. Major activities included the development of collaborative technologies and methodologies for extended ser...
Programme: FP6-IST
Record Number: 48735
Last updated on: 2012-10-03
European research into quantum information science and technology
The main objective of the project is to structure the rather young scientific area of Quantum Information that occurred recently. Up to now most research activities within this field depended on local or national strategies and on the scientific orientation of individual resea...
Programme: FP6-IST
Record Number: 46075
Last updated on: 2010-10-13
Determination of the natural breakage characteristic of rock
The determination of the natural breakage characteristic of the rock mass is a procedure which consists of a series of laboratory experiments and respective analysis. The output from that procedure are material parameters for the rock. They describe its breakage behaviour and ...
Programme: FP5-GROWTH
Record Number: 35048
Last updated on: 2006-12-06
Energy controlled blasting (ECB)
The concept of “Energy controlled blasting” is the precise adaptation of the explosives energy input during blasting into the rock mass with respect to the volume/mass to be blasted hole per hole over the total bench height. The concept consists of a systematic procedure based...
Programme: FP5-GROWTH
Record Number: 35047
Last updated on: 2006-12-06
Mobile measurement system
[REPORT SUMMARY] Mobile measurement system
On the one hand the most industrial grinding machines have no possibility to measure important process data so that the optimisation potential is limited. On the other hand there is nearly no easy-to-handle-equipment, which allows a measure of important process data directly o...
Programme: FP5-GROWTH
Record Number: 41108
Last updated on: 2006-09-15
Improved corundum grinding wheels for grind hardening and finishing operations
In general quality, performance and efficiency of grinding operations are strongly dependant on the behaviour of the used grinding tools. Nearly every grinding process is based on special defined specifications. In order to further reduce the energy consumption during grinding...
Programme: FP5-GROWTH
Record Number: 41107
Last updated on: 2006-09-15
Guidelines to preserve worker protection rules
A safe and stable process contains on the one hand not only the process for machining of cemented carbides which must be safe and stable concerning the process results but also it must be safe and stable concerning workers and machine operators. Because of this, several invest...
Programme: FP5-GROWTH
Record Number: 38320
Last updated on: 2006-04-07
LKR Numerical CALPHAD Approach of Aluminium 2024 Alloy in the semi-solid region.(Prediction of Semi-Solid Temperature at a given composition)
When casting alloys in the semi-solid state with the New Rheocasting Process, usually a 50% solid fraction is located. Up to now, for each alloy a special temperature is given, at which the casting will take place, for instance about 580°C for A356, one of the most common allo...
Programme: FP5-GROWTH
Record Number: 39203
Last updated on: 2006-02-28
Flexible software framework for modularising a multi-ink printing process with strategies for prediction, diagnosis, set points and batch-adaptivity.
The developed system provides a flexible software framework for modularising a halftone printing process, possibly consisting of more than one printing stages, as is the case, e.g., in industrial tile printing. It has the following characteristics: - Setup and training is d...
Programme: FP5-GROWTH
Record Number: 39234
Last updated on: 2006-02-28
LKR Numerical CALPHAD Approach of Magnesium Alloys in the Aluminium-Zink-Manganese Region in the semi-solid region.(Prediction of Semi-Solid Temperature at a given composition)
When casting alloys in the semi-solid state with the New Rheocasting Process, usually a 50% solid fraction is located. Up to now, for each alloy a special temperature is given, at which the casting will take place, for instance about 580°C for A356, one of the most common allo...
Programme: FP5-GROWTH
Record Number: 39204
Last updated on: 2006-02-28
12 > 
List retrieved on: 2018-07-22
Follow us on: RSS Facebook Twitter YouTube Managed by the EU Publications Office Top