Community Research and Development Information Service - CORDIS

Horizon 2020 project information and now also report summaries are available on CORDIS. All H2020 projects can be downloaded from the EU Open Data Portal .

My refinements


Download results of this page


Refine by:

Programme

FP6
All
FP6-IST (1)
FP5
All
FP5-EESD (1)
FP5-GROWTH (30)
FP5-IST (1)

Advanced search

Search projects and results

Results 1 - 10 of 33
Order by: Results/page:
12 3 4 > 
Developing artificial societies
The visionary goal of the project was to realize an evolving artificial society of virtual agents capable of exploring its virtual world and developing its own view of that world. The long-term target is to learn how to design agents that are able to adapt autonomously to, and...
Programme: FP6-IST
Record Number: 46042
Last updated on: 2010-10-01
Electric two-wheelers poised for strong growth
Motorised traffic is the main source of pollution in most European cities. Especially for passenger transport, a modal-shift towards two-(and three-) wheeled vehicles can be a crucial part of the solution to improve these aspects, because they require less space and use less e...
Programme: FP5-EESD
Record Number: 45181
Last updated on: 2010-07-26
Sample collection and testing
Various samples were collected by several partners (KEMA, Fibreforce, Hebo, Plasticon), in various (large) forms: production waste (spray over, pultrusion profiles, cut outs from spray up products, SMC overcuts) and end of life waste (a end of life wind turbine blade). The mat...
Programme: FP5-GROWTH
Record Number: 42465
Last updated on: 2008-11-11
Specification for size reduction, detection and re-activation
Economics of alternative recycling routes recycling routes have been calculated. It is aimed at to keep the cost for react below 182 Euro / ton (excluding the substitute materials value). - Foreseen applications: technical, economical evaluations have been made for several ap...
Programme: FP5-GROWTH
Record Number: 42466
Last updated on: 2006-12-06
Consumer products factory: High volume, continuous manufacturing advanced techniques for in-situ process quality improvement
Original research objectives: To select the most promising application for a NIR-DLS gas sensor to be used for in-line monitoring and control of processes in the consumer products industry. A laboratory feasibility demonstrator has been built to experimentally verify the poten...
Programme: FP5-GROWTH
Record Number: 42762
Last updated on: 2006-11-28
Analytical methods for immunogenicity of proteins
We developed and partly validated an in vivo predictive model for the immunogenicity of hIFNá2a in patients. It is based on a transgenic mouse model that is immune tolerant for hIFN 2. The mice were made immune tolerant by introducing the gene code for the rhIFNá2 into the chr...
Programme: FP5-GROWTH
Record Number: 41118
Last updated on: 2006-09-15
Tow-preg filament winding production process
The tow-preg filament winding production process can be applied as an alternative to wet-filament winding. Research and production testing have shown the following advantages over wet filament winding: 1. Higher production speeds 2. Better laminate quality with lower weight ...
Programme: FP5-GROWTH
Record Number: 41126
Last updated on: 2006-09-15
Methodology on fibre optic sensor embedding in high-pressure composite gas tank using sensor tapes in pre-fabricated fabric sheet
A simple, low-cost and robust method of integrating an optical sensor system in a composite high-pressure gas tank was developed using a pre-fabricated sheet with embedded sensors. The impact on the production process is minimal, no extra manufacturing equipment or machinery i...
Programme: FP5-GROWTH
Record Number: 41125
Last updated on: 2006-09-15
Fibre-optic sensor embedded in prepreg tape for integrating sensor system in high-pressure tank
A prototype sensor tape was developed consisting of a polyamide optical sensor embedded in a glass fibre - epoxy prepreg tape. The following issues were addressed: 1. Producibility 2. Handling, sensor survivability 3. Strength and stiffness 4. Bonding compatibility with...
Programme: FP5-GROWTH
Record Number: 41124
Last updated on: 2006-09-15
Simulation and characterisation methods for assessment of the thermo-mechanical reliability of microelectronics and microsystems
Scope: Thermo-mechanical reliability is becoming an increasing challenge in electronics and microsystems due to ongoing miniaturisation, higher power densities and stricter demands due to operation in harsh environments. The common approach for assessing the reliability of ne...
Programme: FP5-GROWTH
Record Number: 40801
Last updated on: 2006-08-01
12 3 4 > 
List retrieved on: 2018-08-19
Follow us on: RSS Facebook Twitter YouTube Managed by the EU Publications Office Top