Community Research and Development Information Service - CORDIS

Horizon 2020 project information and now also report summaries are available on CORDIS. All H2020 projects can be downloaded from the EU Open Data Portal .

My refinements

Download results of this page

Refine by:


FP6-IST (2)
FP6-NMP (2)

Advanced search

Search projects and results

Results 1 - 10 of 20
Order by: Results/page:
12 > 
Final Report Summary - HIPCON (Holistic Integrated Process CONtrol)
The project was created to develop holistic process control methodology and prototype software enabling production management to account for product quality, as well as economic and environmental values. This has been achieved with an integrated approach that led to a versatil...
Programme: FP6-NMP
Record Number: 51568
Last updated on: 2012-10-03
Final Report Summary - EUPASS (Evolvable Ultra-Precision Assembly Systems)
The EUPASS project aimed to develop affordable, cost effective and sustainable ultra-precision manufacturing solutions by offering rapidly deployable ultra-precision assembly services on demand. This would be achieved by developing and delivering a number of breakthrough techn...
Programme: FP6-IST
Record Number: 51017
Last updated on: 2011-04-14
Final Report Summary - ECOTARGET (New and innovative processes for radical changes of the European pulp and paper industry)
The overall objective of the ECOTARGET project was to provide the pulp and paper industry and its allied industries with radical changes in its production processes in order to enhance competitiveness along with improved sustainability. This means that improvements in producti...
Programme: FP6-NMP
Record Number: 49651
Last updated on: 2011-04-14
Integrating carbon based nanoelectromechanical devices with silicon technology
The overall objective of the CANEL project was to fabricate, analyse and optimise carbon-based nanoelectromechanical (NEMS) devices and to integrate them with silicon technology. With respect to applications the focus has been on information technology devices such as nanoelec...
Programme: FP6-IST
Record Number: 46073
Last updated on: 2010-10-13
Simulation methods
[REPORT SUMMARY] Simulation methods
The filling process of moulds is simulated, which are carrying fibre and textile reinforcements for the produced components. Methods to model non-Newtonian fluid flow through fibre beds. A two-phase continuum constitutive model has been developed and FE-implemented for s...
Programme: FP5-GROWTH
Record Number: 41601
Last updated on: 2009-10-26
New material to improve locking devices
A PM material combining a standard stainless steel and a stainless tool steel have been developed and tested with respect to drill resistance, corrosion resistance and toughness. All being important material characteristics that have not been possible to combine in single deta...
Programme: FP5-GROWTH
Record Number: 43607
Last updated on: 2007-04-20
Green strength enhancement by moderate heat treatment for compacts made of stainless steel powder
Green strength is an important physical property of a metal powder compacted part. The importance of sufficient green strength becomes increasingly apparent if a green machining operation is intended to be performed. In general, stainless steel powder materials not only achiev...
Programme: FP5-GROWTH
Record Number: 43632
Last updated on: 2007-04-20
The primary load-carrying structures in transport equipment are typically complex welded constructions in thick section steel. Future designs of structures for use in transport equipment and vehicles with low Life Cycle Costs will require that attention be given to a number of...
Programme: FP5-GROWTH
Record Number: 39124
Last updated on: 2006-09-04
New concept & product development
The use of simulation, optimization and analysis of thermo mechanical issues in the design and verification phase, will save a great deal of development time and lower the amount of physical prototypes needed. Also the future design will experience higher yield in manufacturin...
Programme: FP5-GROWTH
Record Number: 40817
Last updated on: 2006-08-01
Quality improvements & product re-design
As a complement in Kitrons very strong service portfolio of quality analysis and reliability verification, in troubleshooting cases as for yield problems in running production and field return issues as an external service for customers or as an internal support for Kitron pro...
Programme: FP5-GROWTH
Record Number: 40812
Last updated on: 2006-08-01
12 > 
List retrieved on: 2018-10-22
Follow us on: RSS Facebook Twitter YouTube Managed by the EU Publications Office Top