Community Research and Development Information Service - CORDIS

Horizon 2020 project information and now also report summaries are available on CORDIS. All H2020 projects can be downloaded from the EU Open Data Portal .

My refinements


Download results of this page


Refine by:

Programme

Other
All
FP4-MAST 3 (10)

Advanced search

Search projects and results

Results 1 - 10 of 10
Order by: Results/page:
1
The exploitable result is a microscale sensor for apparent diffusivity. The spatial resolution depends on the grain size of the actual system; in soft sediments and biofilms it can be below 100 microns. Different versions differing with respect to used tracer gas have been dev...
Programme: FP4-MAST 3
Record Number: 25914
Last updated on: 2001-03-01
A flow velocity sensor is constructed according to the principle of a transducer surrounded by a concentric reservoir closed by a membrane, which is penetrated by the transducer. The reservoir contains a tracer that diffuses through the membrane and into the surrounding medium...
Programme: FP4-MAST 3
Record Number: 25915
Last updated on: 2001-03-01
The exploitable result is a microscale sensor for perfusion. The spatial resolution can be in the order of a few tens of microns, depending on the sensor size and perfusion rate. The sensor has not yet been applied in physiological studies, but has shown promising performance ...
Programme: FP4-MAST 3
Record Number: 25916
Last updated on: 2001-03-01
A calibration set-up for calibration of flow velocity sensors has been developed. The set-up consists of a sensor holder connected to a precision motor via a spindle. Via specialised software, the sensor can be moved at well-defined speeds between 10 microns/second and 60 mm/s...
Programme: FP4-MAST 3
Record Number: 25912
Last updated on: 2001-03-01
A microscale sensor for fluid velocity measurements has been developed and its properties investigated. The sensor can be made with tip diameters below 10 microns and the fluid velocity detection limit can be down to 5 microns/second. The sensor consists of a slim transducer (...
Programme: FP4-MAST 3
Record Number: 25911
Last updated on: 2001-03-01
A circular calibration set up for calibration of flow velocity sensors has been developed. The set up consists of a sensor holder connected to a precision motor. Via specialised software, the sensor can be moved in at well-defined speeds between 10 microns/second and 60 mm/sec...
Programme: FP4-MAST 3
Record Number: 25913
Last updated on: 2001-03-01
A microscale sensor for fluid velocity measurements has been developed and its properties investigated. The sensor can be made with tip diameters below 10 microns and the fluid velocity detection limit can be down to 5microns/second. The sensor consists of a slim transducer (e...
Programme: FP4-MAST 3
Record Number: 25908
Last updated on: 2001-03-01
A microscale biosensor for determination of dissolved chemical species (electron donors) that can be oxidized by specific groups of micro-organisms has been developed. It consists of another casing with a tip membrane of 10-100 µm in diameter. Behind the membrane a dense mass ...
Programme: FP4-MAST 3
Record Number: 21736
Last updated on: 2001-02-22
Summary: A simple microscale sensor for nitrate plus nitrate has been developed. It is based on a tapered sensor casing with ion-permeable membrane in the 20-100 thick tip, Nitrate and nitrate diffuse through the tip and into a dense mass of bacteria that reduce the nit...
Programme: FP4-MAST 3
Record Number: 21737
Last updated on: 2000-01-10
Summary: A simple and inexpensive microscale (20-150 m tip) sensor for flow and diffusivity has been developed. It is based on diffusion or advectional transport of a tracer molecule away from a sensor tip, where a transducer continuously monitors the concentration of t...
Programme: FP4-MAST 3
Record Number: 21735
Last updated on: 2000-01-10
1
List retrieved on: 2018-05-25
Follow us on: RSS Facebook Twitter YouTube Managed by the EU Publications Office Top