Community Research and Development Information Service - CORDIS

Horizon 2020 project information and now also report summaries are available on CORDIS. All H2020 projects can be downloaded from the EU Open Data Portal .

My refinements


Download results of this page


Refine by:

Programme

FP6
All
FP6-NMP (8)
FP6-SUSTDEV (1)

Country

Germany (1)
Italy (2)
Netherlands (1)
Norway (1)
Spain (1)
Sweden (1)
Switzerland (1)
United Kingdom (1)

Advanced search

Search projects and results

Results 1 - 10 of 11
Order by: Results/page:
12 > 
Final Report Summary - ALUHEAT (High Efficiency Aluminium Billet Induction Heater)
The 'High Efficiency Aluminium Billet Induction Heater' (ALUHEAT) aimed to develop new technologies based on new materials and novel electromagnetic design. The technology was based on the ability of superconductors to carry direct currents (DC) loss-free and the aim of ALUHEA...
Programme: FP6-NMP
Record Number: 46661
Last updated on: 2012-10-03
Final Report Summary - POLYTECT (Polyfunctional Technical Textiles against Natural Hazards)
Textile materials are extensively used in construction. In geotechnical applications, these materials provide reinforcement for slopes, retaining structures, roadways, embankments, as well as various drainage structures. In masonry applications, textiles are growing in importa...
Programme: FP6-NMP
Record Number: 53037
Last updated on: 2012-06-07
Final Report Summary - VIRTHUALIS (Virtual reality and human factors applications for improving safety)
The objective of the VIRTHUALIS project was to generate new technology, by merging Human factors (HF) knowledge and Virtual reality (VR) technologies, so as to develop products that will enable the reduction of hazards in production plant and storage sites by addressing end-us...
Programme: FP6-NMP
Record Number: 52937
Last updated on: 2011-11-03
Final Report Summary - DIGITEX (Digital Programmed Jetting of Fluids for Multifunctional protective Textiles)
The DIGITEX project was started in 2006 to explore the use of inkjet technology in the textile industry to replace existing analogue production processes such as coating processes, dyeing processes and finishing processes. Next to that the project aimed to seek for new product...
Programme: FP6-NMP
Record Number: 52947
Last updated on: 2011-11-03
Final Report Summary - WACHEUP (New concepts for upgrading pulp mill waste streams to value-added chemicals)
The 'New concepts for upgrading pulp mill waste streams to value-added chemicals' (WACHEUP) project investigated how to upgrade residual products from pulp and cork manufacture to create bio-based chemicals. Many positive results emerged from the project. Separation and updra...
Programme: FP6-NMP
Record Number: 46675
Last updated on: 2011-04-14
Final Report Summary - OPCOM (Development of Ultrasonic Guided Wave Inspection Technology for the Condition Monitoring of Offshore Structures)
The objective of the OPCOM project was to design and build a prototype system, using Ultrasonic Guided Wave (UGW) Technology to continuously monitor the integrity of offshore structures such as oil production platforms and wind turbine towers. The main project results in thi...
Programme: FP6-NMP
Record Number: 50992
Last updated on: 2011-04-14
Final Report Summary - CONCLORE (Controlled Closed Loop Recycling for Life-Cycle Optimised Industrial Production)
Waste and pollution arising from discarded vehicles can be a significant problem in Europe and there are EU directives in place to minimise the waste generated from these vehicles. The 'Controlled closed loop recycling for life-cycle optimised industrial production' (CONCLORE)...
Programme: FP6-NMP
Record Number: 46670
Last updated on: 2011-04-14
Final Report Summary - FACEIT (Fast Advanced Cellular and Ecosystems Information Technologies)
The focus of FACEIT was pollution disaster management and in particular pollution disasters resulting from petroleum oil spills, either in marine or freshwater aquatic systems. The FACEIT project was carried out in the Thematic Sub-Priority Area 6.3 'Global change and ecosyste...
Programme: FP6-SUSTDEV
Record Number: 46987
Last updated on: 2011-04-14
Final Report Summary - SCULPTOR (Sustainable and smart shaping process for radial innovation in European metal forming manufacturing)
As an alternative to conventional stamping and deep drawing processes which are based on big and costly dies and presses, the shaping process proposed in the 'Sustainable and smart shaping process for radial innovation in European metal forming manufacturing' (Sculptor) projec...
Programme: FP6-NMP
Record Number: 46682
Last updated on: 2011-04-14
Formulation for polypropylene polymer totally free of halogen based on intumescent concept using the component C
The ultimate goal of Nerefite is to obtain fibres with interesting fire retardant properties using extrusion and spinning devices. Different additives in addition to polypropylene have been studied. We have noticed that one of the limiting parameters in order to obtain fibres ...
Programme: FP5-GROWTH
Record Number: 39927
Last updated on: 2006-06-29
12 > 
List retrieved on: 2018-08-16
Follow us on: RSS Facebook Twitter YouTube Managed by the EU Publications Office Top