Community Research and Development Information Service - CORDIS

Horizon 2020 project information and now also report summaries are available on CORDIS. All H2020 projects can be downloaded from the EU Open Data Portal .

My refinements


Download results of this page


Refine by:

Programme

FP6
All
FP6-NMP (53)

Advanced search

Search projects and results

Results 1 - 10 of 53
Order by: Results/page:
12 3 4 5 6 > 
FUndamental studies of tranSport in Inorganic Nanostructures
ID: 14032
Start date: 2005-11-01, End date: 2009-10-31
Fusion represents the integration of leading international researchers from a range of disciplines including chemistry, physical chemistry, material science and engineering, established to initiate a problem-based approach to the development of ultra-high performance, high tem...
Programme: FP6-NMP
Record Number: 75389
Last updated on: 2012-11-21
Intermetallic Materials Processing in Relation to Earth and Space Solidification
ID: 500635
Start date: 2004-11-01, End date: 2009-10-31
The scientific objective of the IMPRESS Integrated Project is to understand the critical link between materials processing, structure and final properties of novel, higher-performance intermetallic alloys. These multi-functional materials possess remarkable mechanical, physica...
Programme: FP6-NMP
Record Number: 74352
Last updated on: 2012-10-15
CO-ORdination by Best Practice exchange and Knowledge building by the NMP - NCPs in an Enlarged European Research Society
ID: 11800
Start date: 2004-12-01, End date: 2008-11-30
The COOREERS project is proposed by consortium of 25 partners). The project will proceed in 7 work-packages interrelated to each other, 6 of them are focused on improvement of the competencies of the organisations being contact points on national level by networking and best p...
Programme: FP6-NMP
Record Number: 76422
Last updated on: 2012-02-13
COMPLEX METALLIC ALLOYS
[PROJECT] CMA - COMPLEX METALLIC ALLOYS
ID: 500140
Start date: 2005-07-01, End date: 2010-06-30
It is proposed to contribute to a strengthening of the competitiveness of metallic materials for the benefit of European industries by the formation of a European Network of Excellence CMA developing within four years into a European Integrated Centre for the Development of Ne...
Programme: FP6-NMP
Record Number: 75237
Last updated on: 2012-02-09
Flexible Production experts for reconfigurable assembly technology
ID: 26674
Start date: 2007-01-01, End date: 2011-06-30
The goal of XPRESS is to establish a breakthrough for the factory of the future with a new flexible production concept based on the generic idea of 'specialised intelligent process units' ('expertons') integrated in cross-sectoral learning networks for a customised production....
Programme: FP6-NMP
Record Number: 81545
Last updated on: 2011-09-02
Integrated Design of Catalytic Nanomaterials for a Sustainable Production
ID: 11730
Start date: 2005-04-01, End date: 2010-09-30
The development of high-performance and conceptually innovative catalytic nanomaterials is crucial for industry and for Europes sustainable future. In Europe, several excellent research teams exist in catalysis, but there is a significant fragmentation in the area due to separ...
Programme: FP6-NMP
Record Number: 74835
Last updated on: 2011-07-05
NanoMembranes against Global Warming
[PROJECT] NANOGLOWA - NanoMembranes against Global Warming
ID: 26735
Start date: 2006-12-01, End date: 2011-11-30
The ultimate way to reduce CO2 emissions as required by the Kyoto protocol from the main contributors, the fossil fired power stations, is by CO2 capture. Existing methods (adsorption, non selective cooling) are not very cost- and energy effective: up to 25% consumption of the...
Programme: FP6-NMP
Record Number: 81551
Last updated on: 2011-05-12
SME Supply Chain Integration for Enhanced Fully Customisable Medical Implants, using new biomaterials and rapid manufacturing technologies, to enhance the quality of life for EU citizens
ID: 26599
Start date: 2007-02-01, End date: 2011-01-31
The 2010 industry paradigm will be that the 'Implantable Medical Device' surgeon will plan and execute surgical operations based solely on the clinical needs of the patient. Custom-IMD will realise this vision through the development of new biomaterials for the manufacture ...
Programme: FP6-NMP
Record Number: 81538
Last updated on: 2011-03-01
Technology for the production of massively parallel intelligent cantilever - probe platforms for nanoscale analysis and synthesis
ID: 515739
Start date: 2005-04-01, End date: 2010-09-30
Scanning proximity probes (SPP) are uniquely powerful tools for analysis, manipulation and bottom-up synthesis: they are capable of addressing and engineering surfaces at the atomic level and are the key to unlocking the full potential of Nanotechnology. C urrent SPP nanotools...
Programme: FP6-NMP
Record Number: 75738
Last updated on: 2011-01-28
Aligning, Holding and Fixing Flexible and Difficult to Handle Components
ID: 26670
Start date: 2006-06-01, End date: 2010-11-30
The prime objective of AFFIX is to create a strong manufacturing sector in Europe, which is both environmentally friendly and competitive. In the new manufacturing paradigm the emphasis is on manufacturing low numbers of high value components. In the aerospace and automotive s...
Programme: FP6-NMP
Record Number: 79905
Last updated on: 2011-01-24
12 3 4 5 6 > 
List retrieved on: 2018-08-15
Follow us on: RSS Facebook Twitter YouTube Managed by the EU Publications Office Top