Community Research and Development Information Service - CORDIS

Horizon 2020 project information and now also report summaries are available on CORDIS. All H2020 projects can be downloaded from the EU Open Data Portal .

My refinements


Download results of this page


Refine by:

Programme

FP7
All
FP7-NMP (1)
FP6
All
FP6-AEROSPACE (1)
FP6-NMP (43)
Other
All
IC-INTAS (2)

Advanced search

Search projects and results

Results 1 - 10 of 47
Order by: Results/page:
12 3 4 5 > 
RARE EARTH FREE PERMANENT MAGNETS
[PROJECT] REFREEPERMAG - RARE EARTH FREE PERMANENT MAGNETS
ID: 280670
Start date: 2012-05-01, End date: 2015-04-30
This proposal aims at developing a new generation of novel materials for high performance permanent magnets (PM) with energy product 60 kJ/m3 <(BH)max < 160 kJ/m3, which do not contain any rare-earths or platinum. To achieve this objective two strategies will be used: a) expl...
Programme: FP7-NMP
Record Number: 103430
Last updated on: 2017-01-16
Intermetallic Materials Processing in Relation to Earth and Space Solidification
ID: 500635
Start date: 2004-11-01, End date: 2009-10-31
The scientific objective of the IMPRESS Integrated Project is to understand the critical link between materials processing, structure and final properties of novel, higher-performance intermetallic alloys. These multi-functional materials possess remarkable mechanical, physica...
Programme: FP6-NMP
Record Number: 74352
Last updated on: 2012-10-15
3g-Nanotechnology based targeted drug delivery using the inner ear as a model target organ
ID: 26556
Start date: 2006-11-01, End date: 2011-10-31
The goal of the NANOEAR consortium is to develop novel multifunctional nanoparticles (MFNPs), which are targetable, biodegradable, traceable in-vivo and equipped with controlled drug release. With over 44 million EU citizens with treatable hearing loss, and 40 000 profoundl...
Programme: FP6-NMP
Record Number: 81536
Last updated on: 2012-06-28
COMPLEX METALLIC ALLOYS
[PROJECT] CMA - COMPLEX METALLIC ALLOYS
ID: 500140
Start date: 2005-07-01, End date: 2010-06-30
It is proposed to contribute to a strengthening of the competitiveness of metallic materials for the benefit of European industries by the formation of a European Network of Excellence CMA developing within four years into a European Integrated Centre for the Development of Ne...
Programme: FP6-NMP
Record Number: 75237
Last updated on: 2012-02-09
Flexible assembly processes for the car of the third millennium
ID: 26631
Start date: 2006-05-01, End date: 2011-04-30
The decreasing lifecycle times of car models and the increasing number of variants require from automotive industry to design and operate assembly plants and production networks that are completely flexible, capable of switching from producing one model to another to meet fluc...
Programme: FP6-NMP
Record Number: 79904
Last updated on: 2012-01-06
Integrated Design of Catalytic Nanomaterials for a Sustainable Production
ID: 11730
Start date: 2005-04-01, End date: 2010-09-30
The development of high-performance and conceptually innovative catalytic nanomaterials is crucial for industry and for Europes sustainable future. In Europe, several excellent research teams exist in catalysis, but there is a significant fragmentation in the area due to separ...
Programme: FP6-NMP
Record Number: 74835
Last updated on: 2011-07-05
Technology for the production of massively parallel intelligent cantilever - probe platforms for nanoscale analysis and synthesis
ID: 515739
Start date: 2005-04-01, End date: 2010-09-30
Scanning proximity probes (SPP) are uniquely powerful tools for analysis, manipulation and bottom-up synthesis: they are capable of addressing and engineering surfaces at the atomic level and are the key to unlocking the full potential of Nanotechnology. C urrent SPP nanotools...
Programme: FP6-NMP
Record Number: 75738
Last updated on: 2011-01-28
Development of load-bearing fibre reinforced composite based non-metallic biomimetic bone implant
ID: 26279
Start date: 2006-12-01, End date: 2010-11-30
The aim of NEWBONE is to develop fibre reinforced composite (FRC) material load-bearing implant: to produce at prototype level two resorbable fixation devices in knee/shoulder ligament repair and two non-resorbable bone fixation devices for reconstruction of large bone defects...
Programme: FP6-NMP
Record Number: 81530
Last updated on: 2011-01-24
Controlled production of high tech multifunctional products and their recycling
ID: 26666
Start date: 2006-10-01, End date: 2010-11-30
Industrial needs in terms of multifunctionnal components are increasing. Several sectors are concerned, ranging from mature high volume markets like automotive applications, high added value parts like space & aeronautic components or even emerging activities like new technolo...
Programme: FP6-NMP
Record Number: 81543
Last updated on: 2011-01-24
Aligning, Holding and Fixing Flexible and Difficult to Handle Components
ID: 26670
Start date: 2006-06-01, End date: 2010-11-30
The prime objective of AFFIX is to create a strong manufacturing sector in Europe, which is both environmentally friendly and competitive. In the new manufacturing paradigm the emphasis is on manufacturing low numbers of high value components. In the aerospace and automotive s...
Programme: FP6-NMP
Record Number: 79905
Last updated on: 2011-01-24
12 3 4 5 > 
List retrieved on: 2018-08-21
Follow us on: RSS Facebook Twitter YouTube Managed by the EU Publications Office Top