Community Research and Development Information Service - CORDIS

Horizon 2020 project information and now also report summaries are available on CORDIS. All H2020 projects can be downloaded from the EU Open Data Portal .

My refinements


Download results of this page


Refine by:

Advanced search

Search projects and results

Results 1 - 10 of 33
Order by: Results/page:
12 3 4 > 
ID: SMT4972157
Start date: 1997-11-01, End date: 2001-10-31
OPTIMO concerns the definition and control of quality in the production of water for human consumption and in the production of blending of wines. In the water industry, on-line colour measurement is the principle parameter driving the treatment process (coagulation) and in th...
Programme: FP4-SMT
Record Number: 39072
Last updated on: 2002-10-21
ID: SMT4972174
Start date: 1998-01-01, End date: 2000-12-31
Programme: FP4-SMT
Record Number: 38197
Last updated on: 2002-10-21
ID: SMT4972185
Start date: 1998-01-01, End date: 1999-12-31
Programme: FP4-SMT
Record Number: 38926
Last updated on: 2002-10-21
ID: SMT4972173
Start date: 1997-10-01, End date: 1999-09-30
Programme: FP4-SMT
Record Number: 38263
Last updated on: 2002-10-21
ID: SMT4965502
Start date: 1997-01-01, End date: 1998-12-31
Programme: FP4-SMT
Record Number: 40403
Last updated on: 2002-10-21
ID: SMT4972182
Start date: 1997-12-01, End date: 2000-05-31
Programme: FP4-SMT
Record Number: 38925
Last updated on: 2002-10-21
ID: SMT4972153
Start date: 1997-10-01, End date: 2000-09-30
Programme: FP4-SMT
Record Number: 38258
Last updated on: 2002-10-21
ID: SMT4972158
Start date: 1997-10-01, End date: 2000-09-30
The overall aims of the project were: - to establish measurement practices and procedures which improve accuracy and repeatability and, crucially, which avoid ambiguity - to clarify why simple "conversions" are not possible between results using different measurement approache...
Programme: FP4-SMT
Record Number: 38192
Last updated on: 2002-05-27
ID: SMT4985525
Start date: 1999-04-01, End date: 2001-09-30
Objectives During this project a new technology for the 3D-inspection of small parts following the principle of confocal imaging will be built up and analysed. The key part will be a so-called Digital Micromirror Device (DMDTM), consisting of 864x576 programmable mirrors. Each...
Programme: FP4-SMT
Record Number: 47489
Last updated on: 2002-04-19
ID: SMT4982214
Start date: 1998-05-01, End date: 2001-04-30
Objectives A first aim of this project is to contribute to the improvement of the European rules concerning the test methods for ADCs, by proposing to CENELEC a draft norm concerning the parameters specifying the dynamic behaviour of ADCs, the measurement conditions and the d...
Programme: FP4-SMT
Record Number: 43763
Last updated on: 2002-04-19
12 3 4 > 
List retrieved on: 2018-05-22
Follow us on: RSS Facebook Twitter YouTube Managed by the EU Publications Office Top