Community Research and Development Information Service - CORDIS

Horizon 2020 project information and now also report summaries are available on CORDIS. All H2020 projects can be downloaded from the EU Open Data Portal .

My refinements


Download results of this page


Refine by:

Programme

FP7
All
FP7-NMP (1)
FP6
All
FP6-AEROSPACE (2)
FP6-NMP (32)
Other
All
IC-INTAS (2)

Advanced search

Search projects and results

Results 1 - 10 of 37
Order by: Results/page:
12 3 4 > 
RARE EARTH FREE PERMANENT MAGNETS
[PROJECT] REFREEPERMAG - RARE EARTH FREE PERMANENT MAGNETS
ID: 280670
Start date: 2012-05-01, End date: 2015-04-30
This proposal aims at developing a new generation of novel materials for high performance permanent magnets (PM) with energy product 60 kJ/m3 <(BH)max < 160 kJ/m3, which do not contain any rare-earths or platinum. To achieve this objective two strategies will be used: a) expl...
Programme: FP7-NMP
Record Number: 103430
Last updated on: 2017-01-16
Aerosol technologies and hierarchical assembly/ manufacturing for advanced nano-structured porous materials
ID: 26678
Start date: 2007-01-01, End date: 2011-06-30
ATLANTIS is motivated by the fact that suitably 3-D engineered and functionalised porous structured reactors can bring important breakthroughs not only in the already established market for automotive emission control systems, but also on the emerging biotech market of protein...
Programme: FP6-NMP
Record Number: 81546
Last updated on: 2012-08-27
Charged particle nanotech
[PROJECT] CHARPAN - Charged particle nanotech
ID: 515803
Start date: 2005-04-01, End date: 2009-03-31
The IP proposal CHARGED PARTICLE NANOTECH (CHARPAN) focuses on the research and development of a new production technology for nanotechnology devices. In particular, CHARPAN will enable low cost engineering of complex 3D surface structures with nanometeri c precision. No such ...
Programme: FP6-NMP
Record Number: 75747
Last updated on: 2012-08-08
3g-Nanotechnology based targeted drug delivery using the inner ear as a model target organ
ID: 26556
Start date: 2006-11-01, End date: 2011-10-31
The goal of the NANOEAR consortium is to develop novel multifunctional nanoparticles (MFNPs), which are targetable, biodegradable, traceable in-vivo and equipped with controlled drug release. With over 44 million EU citizens with treatable hearing loss, and 40 000 profoundl...
Programme: FP6-NMP
Record Number: 81536
Last updated on: 2012-06-28
Structural monitoring with advanced integrated sensor technologies
ID: 516103
Start date: 2005-05-01, End date: 2008-10-31
The objective of the proposed project is to let the best and most advanced sensing technologies to become an integral part of the aircraft structure and to thus implement Structural Health Monitoring (SHM) into aircraftstructural design with respect to maintenance cost reducti...
Programme: FP6-AEROSPACE
Record Number: 75778
Last updated on: 2012-03-08
Aeronautical application of wrought magnesium
ID: 516152
Start date: 2005-03-01, End date: 2008-12-31
Magnesium with a density of only 65% of aluminium, could be a break through technology in the aerospace industry if used for cost efficient, low weight components and airframe structures. However, to use this low weight material the mechanical and technological properties have...
Programme: FP6-AEROSPACE
Record Number: 75791
Last updated on: 2012-03-08
CO-ORdination by Best Practice exchange and Knowledge building by the NMP - NCPs in an Enlarged European Research Society
ID: 11800
Start date: 2004-12-01, End date: 2008-11-30
The COOREERS project is proposed by consortium of 25 partners). The project will proceed in 7 work-packages interrelated to each other, 6 of them are focused on improvement of the competencies of the organisations being contact points on national level by networking and best p...
Programme: FP6-NMP
Record Number: 76422
Last updated on: 2012-02-13
COMPLEX METALLIC ALLOYS
[PROJECT] CMA - COMPLEX METALLIC ALLOYS
ID: 500140
Start date: 2005-07-01, End date: 2010-06-30
It is proposed to contribute to a strengthening of the competitiveness of metallic materials for the benefit of European industries by the formation of a European Network of Excellence CMA developing within four years into a European Integrated Centre for the Development of Ne...
Programme: FP6-NMP
Record Number: 75237
Last updated on: 2012-02-09
Flexible Assembly Systems through Work-place Sharing and Time Sharing Human-Machine Cooperation
ID: 26697
Start date: 2006-09-01, End date: 2010-08-31
The growing number of product variants, smaller lot sizes, accelerated time to market and shorter life-cycles of products have lead to increasing demands on assembly equipment and concepts. They must realise high flexibility related to variants, low cost adaptability of produc...
Programme: FP6-NMP
Record Number: 79907
Last updated on: 2012-02-07
Technology for the production of massively parallel intelligent cantilever - probe platforms for nanoscale analysis and synthesis
ID: 515739
Start date: 2005-04-01, End date: 2010-09-30
Scanning proximity probes (SPP) are uniquely powerful tools for analysis, manipulation and bottom-up synthesis: they are capable of addressing and engineering surfaces at the atomic level and are the key to unlocking the full potential of Nanotechnology. C urrent SPP nanotools...
Programme: FP6-NMP
Record Number: 75738
Last updated on: 2011-01-28
12 3 4 > 
List retrieved on: 2018-07-23
Follow us on: RSS Facebook Twitter YouTube Managed by the EU Publications Office Top