Community Research and Development Information Service - CORDIS

Horizon 2020 project information and now also report summaries are available on CORDIS. All H2020 projects can be downloaded from the EU Open Data Portal .

My refinements


Download results of this page


Advanced search

Search projects and results

Results 1 - 10 of 27
Order by: Results/page:
12 3 > 
ID: MA1E0005
Start date: 1988-02-01, End date: 1991-01-31
The aim of the project is to improve ND-FE-B magnets or to find novel materials with improved properties. They may replace ferrites with the advantage of a smaller and less heavy device with better performance in starter motors, high quality motors for consumer electronics (CD...
Programme: FP1-EURAM
Record Number: 21643
Last updated on: 1994-01-23
ID: MA1E0083
Start date: 1988-09-01, End date: 1991-02-28
THE THERMOMECHANICAL BEHAVIOUR OF CFRP STRUCTURES DEPENDS DIRECTLY ON THE THERMAL STABILITY OF THE MATRIX WHICH LIMITS THE OPERATION TEMPERATURE. THE AIM OF THIS R&D PROJECT IS THE REALISATION OF ADVANCED COMPOSITES MATERIALS ON THE BASIS OF HEAT-RESISTANT CARBON FIBRES NEW TH...
Programme: FP1-EURAM
Record Number: 21647
Last updated on: 1994-01-23
ID: MA1E0049
Start date: 1988-10-01, End date: 1992-01-31
This research project aims at delaying the onset of interfibre/matrix cracking in multilayer CFRP composites by applying design/manufacturing means, which are in analogy to the concept of prestressed concrete. Two major routes are being studied: Controlled expansion of a com...
Programme: FP1-EURAM
Record Number: 6487
Last updated on: 1992-05-14
ID: MA1E0077
Start date: 1988-03-01, End date: 1990-12-31
The aim of this project is to investigate new preforms which, due to the woven structure of the reinforcing carbon fibres and the thermoplastic matrix fibres, are suitable for manufacturing complex shaped composite parts. The initial stage of the work will concentrate on the ...
Programme: FP1-EURAM
Record Number: 6480
Last updated on: 1992-05-14
ID: MA1E0067
Start date: 1988-03-01, End date: 1991-08-31
The aim of the project is the development of advanced fib re reinforced high performance thermoplastics (e.g. PPS, PEEK) and in particular the development of appropriate processing techniques of 'large' organic sheets, prepregs, ribbons and foils. The program envisages the fol...
Programme: FP1-EURAM
Record Number: 6488
Last updated on: 1992-05-13
ID: MA1E0072
Start date: 1988-01-01, End date: 1991-06-30
It is presently not possible to predict the failure of ceramic components on the basis of simple microstructural and fracture mechanical parameters. In this work, computational (finite elements, simulation of microstructure and fracture) as well as fracture mechanical and met...
Programme: FP1-EURAM
Record Number: 6517
Last updated on: 1992-05-06
ID: MA1E0025
Start date: 1988-06-01, End date: 1991-02-28
The objectiv es of this project are: to optimize an ion plating technique for the deposition of dense, corrosion resistant coatings of uniform thickness and structure onto substrates of prescribed shapes; to develop a model of the coating process which will predict the proce...
Programme: FP1-EURAM
Record Number: 6498
Last updated on: 1992-05-05
ID: MA1E0014
Start date: 1988-02-01, End date: 1991-05-31
1 Development and optimization of new wear-resistant PVD coatings on differnet types of HSS tools. 2 Optimization double treatment of plasma nitriding and PVD process. 3 Development of an industrial low temperature CVD process for WC CVD equipment. 4 Jobshop comparisons betwee...
Programme: FP1-EURAM
Record Number: 6504
Last updated on: 1992-05-05
ID: MA1E0028
Start date: 1988-01-01, End date: 1990-12-31
The prime objective of this project is to develop and evaluate advanced composite (ceramic and ceramic/metal) coatings, deposited by ionisation assisted PVD techniques specifically for tribological applications in industry. Two main PVD methods are used: reactive evaporation a...
Programme: FP1-EURAM
Record Number: 6497
Last updated on: 1992-05-05
ID: MA1E0099
Start date: 1989-06-01, End date: 1992-02-28
To make the most efficient use of silicon nitride and silicon carbide at temperatures of 1400 and 1600C, there is a need to understand the steady stress and dynamic stress (mechanical and thermal) durability together with particularly debilitating environments such as corrosio...
Programme: FP1-EURAM
Record Number: 6472
Last updated on: 1992-04-29
12 3 > 
List retrieved on: 2018-08-21
Follow us on: RSS Facebook Twitter YouTube Managed by the EU Publications Office Top