Community Research and Development Information Service - CORDIS

Horizon 2020 project information and now also report summaries are available on CORDIS. All H2020 projects can be downloaded from the EU Open Data Portal .

My refinements


Download results of this page


Advanced search

Search projects and results

Results 1 - 10 of 50
Order by: Results/page:
12 3 4 5 > 
ID: MA1E0039
Start date: 1987-12-01, End date: 1990-05-30
THE OBJECTIVE OF THE PROPOSED RESEARCH IS TO DEVELOP A PROCEDURE FOR BONDING CERAMIC/METAL AND CERAMIC/CERAMIC THAT CAN BE INDUSTRIALIZED, APPLIED TO ALL GEOMETRIES AND QUALITIES OF MATERIALS, AND WHICH IMPROVES THE BONDING QUALITY.
Programme: FP1-EURAM
Record Number: 21646
Last updated on: 1994-01-23
ID: MA1E0098
Start date: 1989-04-01, End date: 1992-03-31
THE AIM OF THE PROJECT IS TO PRODUCE COST EFFECTIVE HIGH PERFORMANCE POLYMER COMPOSITES BY JUDICIOUS REINFORCEMENT AND MIXING (HYBRIDIZATION )0) OF BOTHHIGH AND LOW PERFORMANCE FIBRES IN THE SAME MATRIX SYSTEM.TO ACHIEVE THIS OBJECTIVE IT IS PROPOSED TO FABRICATE A SYSTEMATIC ...
Programme: FP1-EURAM
Record Number: 21649
Last updated on: 1994-01-23
ID: MA1E0083
Start date: 1988-09-01, End date: 1991-02-28
THE THERMOMECHANICAL BEHAVIOUR OF CFRP STRUCTURES DEPENDS DIRECTLY ON THE THERMAL STABILITY OF THE MATRIX WHICH LIMITS THE OPERATION TEMPERATURE. THE AIM OF THIS R&D PROJECT IS THE REALISATION OF ADVANCED COMPOSITES MATERIALS ON THE BASIS OF HEAT-RESISTANT CARBON FIBRES NEW TH...
Programme: FP1-EURAM
Record Number: 21647
Last updated on: 1994-01-23
ID: MA1E0077
Start date: 1988-03-01, End date: 1990-12-31
The aim of this project is to investigate new preforms which, due to the woven structure of the reinforcing carbon fibres and the thermoplastic matrix fibres, are suitable for manufacturing complex shaped composite parts. The initial stage of the work will concentrate on the ...
Programme: FP1-EURAM
Record Number: 6480
Last updated on: 1992-05-14
ID: MA1E0055
Start date: 1988-06-01, End date: 1991-05-31
These are to develop strong magnesium alloys whic h can be shaped in a semi-solid thixotropic state,e.g. by casting under pressure to form accurate pore-free components of good surface finish which can be strengthened by heat treatment. The effect of this on their susceptibili...
Programme: FP1-EURAM
Record Number: 6438
Last updated on: 1992-05-07
ID: MA1E0002
Start date: 1988-02-01, End date: 1991-01-31
To develop new aluminium with improved properties, especi ally strength at room temperature and Metal Matrix composites with high strength and high stiffness by using a Spray Deposition Process. This process allows high solidification rates and produces fine microstructure and...
Programme: FP1-EURAM
Record Number: 6432
Last updated on: 1992-05-07
ID: MA1E0072
Start date: 1988-01-01, End date: 1991-06-30
It is presently not possible to predict the failure of ceramic components on the basis of simple microstructural and fracture mechanical parameters. In this work, computational (finite elements, simulation of microstructure and fracture) as well as fracture mechanical and met...
Programme: FP1-EURAM
Record Number: 6517
Last updated on: 1992-05-06
ID: MA1E0030
Start date: 1988-01-01, End date: 1990-12-31
The aim of the present project is to use a soft chemistry approach to prepare new organic-inorganic layered materials with potential applications in the domain of heterogenous catalysis or magnetic pigments. This work associates organic chemists, solid state inorganic chemists...
Programme: FP1-EURAM
Record Number: 6514
Last updated on: 1992-05-05
ID: MA1E0015
Start date: 1987-11-01, End date: 1990-10-31
The use of laser beams has recently been developed for surface cladding with the addition of alloying elements. However, the coating obtained may have some defects, such as porosity, shrinkage, and cracks due to fast cooling, which can be extremely damaging for the application...
Programme: FP1-EURAM
Record Number: 6500
Last updated on: 1992-05-05
ID: MA1E0057
Start date: 1988-03-01, End date: 1990-02-28
The aims of the research programme are: - To obtain thin Si-Al casting with spheroidal graphite and a possibly non-existent primary chill depth. - To obtain bainitic structures in the casting, as cast alloying and Austenite stabilizers in appropriate percentage, in addition to...
Programme: FP1-EURAM
Record Number: 6506
Last updated on: 1992-05-05
12 3 4 5 > 
List retrieved on: 2018-08-15
Follow us on: RSS Facebook Twitter YouTube Managed by the EU Publications Office Top