Community Research and Development Information Service - CORDIS

Horizon 2020 project information and now also report summaries are available on CORDIS. All H2020 projects can be downloaded from the EU Open Data Portal .

My refinements


Download results of this page


Advanced search

Search projects and results

Results 1 - 6 of 6
Order by: Results/page:
1
ID: MA1E0098
Start date: 1989-04-01, End date: 1992-03-31
THE AIM OF THE PROJECT IS TO PRODUCE COST EFFECTIVE HIGH PERFORMANCE POLYMER COMPOSITES BY JUDICIOUS REINFORCEMENT AND MIXING (HYBRIDIZATION )0) OF BOTHHIGH AND LOW PERFORMANCE FIBRES IN THE SAME MATRIX SYSTEM.TO ACHIEVE THIS OBJECTIVE IT IS PROPOSED TO FABRICATE A SYSTEMATIC ...
Programme: FP1-EURAM
Record Number: 21649
Last updated on: 1994-01-23
ID: MA1E0056
Start date: 1988-10-01, End date: 1991-09-30
The main purpose of this project is the study of the behaviour of titanium grades 2, 5 and 12 in hydrogen uptake environments and the role of hydrogen and hybrides in the mechanism of cracking.
Programme: FP1-EURAM
Record Number: 6445
Last updated on: 1992-04-28
ID: MA1E0053
Start date: 1988-01-01, End date: 1990-12-31
Magnesium with a density of 1.7 is the lightest structural material and is 40% lighter than aluminium. However, magnesium alloys have not been extensively used because of their lower mechanical properties and poorer corrosion resistance compared with aluminium. Bringing these ...
Programme: FP1-EURAM
Record Number: 6459
Last updated on: 1992-04-28
ID: MA1E0070
Start date: 1988-12-01, End date: 1991-06-30
To accelerate the commercial exploitation within Europe of rapidly solidified (RS) aluminium alloys for elevated temperature fatigue applications by: Predicting and assessing the use of alloying additions to enhance fatigue performance through dynamic strain ageing (DSA). O...
Programme: FP1-EURAM
Record Number: 6458
Last updated on: 1992-04-28
ID: MA1E0071
Start date: 1988-02-01, End date: 1991-01-31
1. To determine the optimum squeeze casting conditions for a range of high strength Al and Mg-base alloys in order to maximize metal quality and mechanical properties. 2. To improve mechanical properties even further by producing mmcs using the high strength alloys as the matr...
Programme: FP1-EURAM
Record Number: 6457
Last updated on: 1992-04-28
ID: MA1E0051
Start date: 1988-02-01, End date: 1991-01-31
Acquisiti on of fundamental knowledge on Metal Matrix Composites, especially ceramic fibre reinforced aluminium alloys. Study of the processing aspects. Correlation of thermomechanical properties to microstructure and interfacial phenomena.
Programme: FP1-EURAM
Record Number: 6439
Last updated on: 1992-04-28
1
List retrieved on: 2018-10-22
Follow us on: RSS Facebook Twitter YouTube Managed by the EU Publications Office Top