Community Research and Development Information Service - CORDIS

Horizon 2020 project information and now also report summaries are available on CORDIS. All H2020 projects can be downloaded from the EU Open Data Portal .

My refinements

Download results of this page

Refine by:


FP7-JTI (1)
FP7-NMP (3)
FP6-NMP (8)
FP4-TMR (10)

Advanced search

Search projects and results

Results 1 - 10 of 111
Order by: Results/page:
12 3 4 5 6 7 8 9 10 > >| 
Development of a sustainable exploitation scheme for Europe’s Rare Earth ore deposits
ID: 309373
Start date: 2013-01-01, End date: 2017-12-31
With numerous European industries heavily depended on imported REE raw materials, there is a need for EU to secure a viable supply of REE minerals as well as develop from the ground up the currently non-existent European REE extraction and processing industry. The goal of the...
Programme: FP7-NMP
Record Number: 106537
Last updated on: 2017-11-20
Sulphur, Carbon, and re-Oxidation Tolerant Anodes and Anode Supports for Solid Oxide Fuel Cells
ID: 256730
Start date: 2010-10-01, End date: 2013-12-31
The project will demonstrate a new full ceramic SOFC cell with superior robustness as regards to sulphur tolerance, carbon deposition (coking) and re-oxidation (redox resistance). Such a cell mitigates three major failure mechanisms which today have to be addressed at the sys...
Programme: FP7-JTI
Record Number: 97936
Last updated on: 2017-05-29
Multi-scale modelling of interfacial phenomena in acrylic adhesives undergoing deformation
ID: 228320
Start date: 2009-06-01, End date: 2012-05-31
In soft nanostructured materials containing polymers (such as acrylic adhesives), interfaces pose specific challenges since they are usually diffuse and can transfer stress through chain entanglements. The equilibrium structure of soft polymer interfaces is well-known, but th...
Programme: FP7-NMP
Record Number: 91804
Last updated on: 2017-05-29
Self-healing concrete to create durable and sustainable concrete structures
ID: 309451
Start date: 2013-01-01, End date: 2016-12-31
"Within the call “Self-healing materials for prolonged lifetime”, self-healing concrete is an important topic. Adequate perpetuation of the road, tunnel and bridge network, is crucial to preserving European cohesion and business operations; and around 70% of this infrastructu...
Programme: FP7-NMP
Record Number: 106380
Last updated on: 2015-03-11
3g-Nanotechnology based targeted drug delivery using the inner ear as a model target organ
ID: 26556
Start date: 2006-11-01, End date: 2011-10-31
The goal of the NANOEAR consortium is to develop novel multifunctional nanoparticles (MFNPs), which are targetable, biodegradable, traceable in-vivo and equipped with controlled drug release. With over 44 million EU citizens with treatable hearing loss, and 40 000 profoundl...
Programme: FP6-NMP
Record Number: 81536
Last updated on: 2012-06-28
A Radically Innovatie New Production Process for Single-Piece, Recyclable Fluid Transmission Systems with Self-Diagnostic Capability to Fluid Loss Potential
ID: 505712
Start date: 2004-09-01, End date: 2008-08-31
This project proposes to generate new scientific understanding of the processing of thermoplastics using microwave energy for targeted, controlled melting, drilling by ablation and controlled hardening. It also proposes to generate new understanding of resonant vibration atten...
Programme: FP6-NMP
Record Number: 72773
Last updated on: 2010-01-20
Non-noble catalysts for proton exchange membrane fuel cell anodes
ID: 32175
Start date: 2007-02-01, End date: 2010-01-31
For PEM Fuel Cells to attain economic viability for mass production, catalyst cost must be reduced. Currently, platinum-based supported nanoparticle catalysts, are used for the hydrogen oxidation reaction at the anode. The replacement of such catalysts by cheaper non-noble alt...
Programme: FP6-NMP
Record Number: 81321
Last updated on: 2010-01-15
Novel functional polymer materials for MEMS and NEMS applications
ID: 13619
Start date: 2005-02-01, End date: 2008-04-30
The goal of NOVOPOLY is the development of new functional materials for pplications in the fields of micro- and nano- systems technology (MEMS and NEMS). Starting point of the proposal is the need to add functionality to existing photostructurable polyme rs like SU-8 and overc...
Programme: FP6-NMP
Record Number: 78257
Last updated on: 2010-01-06
Integrated piezoelectric devices
ID: 515757
Start date: 2005-03-01, End date: 2010-02-28
The objectives of the NoE MIND are to increase the level of understanding of all phenomena in piezoelectric materials and structures, and to apply this knowledge to the design of new and improved devices such as sensors, transducers, actuators and motors f or applications rang...
Programme: FP6-NMP
Record Number: 75740
Last updated on: 2009-10-01
Innovation and Sustainable Development in the Fibre Based Packaging Value Chain
ID: 500311
Start date: 2004-06-01, End date: 2008-09-30
The overall objective of the RTD activities is to develop and implement a Sustainable Packaging Tool Platform based on renewable resources, giving innovative properties to packaging, thereby offering new value added packaging options for packaging users and for consumers. The ...
Programme: FP6-NMP
Record Number: 74346
Last updated on: 2009-10-01
12 3 4 5 6 7 8 9 10 > >| 
List retrieved on: 2018-10-15
Follow us on: RSS Facebook Twitter YouTube Managed by the EU Publications Office Top