Community Research and Development Information Service - CORDIS

Horizon 2020 project information and now also report summaries are available on CORDIS. All H2020 projects can be downloaded from the EU Open Data Portal .

My refinements


Download results of this page


Refine by:

Content type

Project (11)
Report Summary (11)

Country

Austria (8)
Belgium (5)
Denmark (1)
Finland (2)
France (4)
Germany (9)
Greece (1)
Ireland (2)
Israel (2)
Italy (4)
Latvia (1)
Netherlands (7)
Norway (1)
Poland (1)
Spain (12)
Sweden (2)
Switzerland (2)
United Kingdom (9)

Advanced search

Search projects and results

Results 1 - 10 of 22
Results/page:
12 3 > 
The Development of Medium- and Large-Scale Sustainable Manufacturing Process Platforms for Clinically Compliant Solid Core Nanopharmaceuticals
ID: 646364
Start date: 2015-02-01, End date: 2019-01-31
A number of nanomedicine formulations have enabled, or been shown to hold considerable potential for enabling more effective and less toxic therapeutic interventions. However, progress to date in translating these initiatives to commercial success has been limited. One of...
Programme: H2020-EU.2.1.2.1.
Record Number: 194440
Last updated on: 2016-11-29
Bringing innovAtion by Scaling up nanoMATerials and Inks for printing
ID: 646159
Start date: 2015-01-01, End date: 2017-12-31
The BASMATI project will address the development of active nanomaterial and electrochemical inks for printing technologies such as screen and inkjet printing. The ink formulations will be tested on a case study through printing of a thin film battery. The general objective of...
Programme: H2020-EU.2.1.2.1.
Record Number: 194420
Last updated on: 2017-06-23
INdustrial Scale Production of Innovative nanomateRials for printEd Devices
ID: 646155
Start date: 2015-01-01, End date: 2018-12-31
Printed electronics (PE) is set to revolutionise the electronics industry over the next decade and can offer Europe the opportunity to regain lost market share. Printed electronics allows for the direct printing of a range of functional (conductive, resistive, capacitive and...
Programme: H2020-EU.2.1.2.1.
Record Number: 194419
Last updated on: 2017-07-12
Periodic Reporting for period 2 - NANOFACTURING (The Development of Medium- and Large-Scale Sustainable Manufacturing Process Platforms for Clinically Compliant Solid Core Nanopharmaceuticals)
One of the major limiting factors for the further development of nanomedicines is the lack of facilities in the EU for the manufacture of such products in compliance with cGMP and at a scale commensurate with supplying a clinical trial program through to complete proof of...
Programme: H2020-EU.2.1.2.1.
Record Number: 194923
Last updated on: 2017-02-17
Periodic Reporting for period 2 - INSPIRED (INdustrial Scale Production of Innovative nanomateRials for printEd Devices)
The purpose of the INSPIRED project is to develop and demonstrate cost-effective, innovative high throughput synthesis and functionalization of nanomaterials already validated in the laboratory (e.g. currently at TRL 4) for printed electronic systems using high volume printing...
Programme: H2020-EU.2.1.2.1.
Record Number: 192934
Last updated on: 2016-12-15
Periodic Reporting for period 1 - BASMATI (Bringing innovAtion by Scaling up nanoMATerials and Inks for printing)
*Summary*BASMATI addresses the development of active nanomaterials and their formulation in conductive and electrochemical inks for screen and inkjet printing. As a case study, these functional inks will be applied in a printed thin film battery. BASMATI’s general objective...
Programme: H2020-EU.2.1.2.1.
Record Number: 194951
Last updated on: 2017-02-17
Periodic Reporting for period 1 - Hi-Response (Innovative High Resolution Electro-Static printing of Multifunctional Materials.)
The HI-RESPONSE project will overcome the current limitation relating to the resolution, viscosity and engineering design through the development of a highly innovative pulsed Electro-static printing technology (ESJET) that:• Can achieve a droplet volume down to 0.001 Pico...
Programme: H2020-EU.2.1.2.1.
Record Number: 204712
Last updated on: 2017-10-31
Periodic Reporting for period 2 - NANOTUN3D (Development of the complete workflow for producing and using a novel nanomodified Ti-based alloy for additive manufacturing in special applications.)
The use of nanoparticles (NPs) in 3D printing is progressing rapidly, and polymeric materials have benefited from the addition of carbon nanotubes, graphene, etc., to improve mechanical properties and to sport additional features such as a certain degree of conductivity...
Programme: H2020-EU.2.1.2.2.
Record Number: 204698
Last updated on: 2017-10-31
Innovative High Resolution Electro-Static printing of Multifunctional Materials.
ID: 646296
Start date: 2015-03-01, End date: 2018-12-31
The EU is well placed to exploit printed electronic technologies to create greater economic and social benefits for the EU, but only if we are able to commercialise innovative technologies created within the EU.Ink jet printing technologies are at the forefront of printed...
Programme: H2020-EU.2.1.2.1.
Record Number: 194423
Last updated on: 2017-08-04
Development of the complete workflow for producing and using a novel nanomodified Ti-based alloy for additive manufacturing in special applications.
ID: 685952
Start date: 2015-10-01, End date: 2019-03-31
NANONTUN3D will take advantage of the possibilities of Additive Manufacturing (AM) together with the development of a specially tailored Ti- based nano-aditived material to achieve dramatic improvements in structural parts of aero, space, mobility, and equipment sectors...
Programme: H2020-EU.2.1.2.2.
Record Number: 198813
Last updated on: 2017-04-19
12 3 > 
List retrieved on: 2018-11-21
Follow us on: RSS Facebook Twitter YouTube Managed by the EU Publications Office Top