Servizio Comunitario di Informazione in materia di Ricerca e Sviluppo - CORDIS

Le informazioni sui progetti di Orizzonte 2020 e ora anche le relative sintesi delle relazioni sono disponibili su CORDIS. Tutti i progetti H2020 possono essere scaricati dal Portale Open Data dell'UE .

My refinements


Download results of this page


Perfeziona per:

Tipo di contenuto

Progetto (83)

Paese

Belgio (7)
Francia (7)
Germania (27)
Italia (15)
Lussemburgo (4)
Paesi Bassi (7)
Regno Unito (13)

Advanced search

Cerca progetti e risultati

Results 1 - 10 of 83
Results/page:
12 3 4 5 6 7 8 9 > 
ID: 7210-EA/212
Data di inizio: 1985-07-01, Termine: 1988-06-30
THE AIM OF THE RESEARCH IS TO IMPROVE THE DIMENSIONAL QUALITY OF THE BUTT-ENDS OF STRIP PRODUCED IN CONTINUOUS HOT-ROLLING MILLS.
Programme: ECSC-STEELRES 6C
Record Number: 13893
Last updated on: 1994-01-23
ID: 7210-EA/505
Data di inizio: 1983-07-01, Termine: 1988-06-30
UNLIKE MILLS FOR FLAT PRODUCTS, BEAM MILLS ARE NOT GENERALLY EQUIPPED WITH ADVANCED TECHNICAL SYSTEMS FOR CONTROLLING THE ROLLING PROCESS. IN THEIR ABSENCE, IT IS DIFFICULT TO ADJUST THE MILL PARAMETERS (ROLLING PLAN, ROLL POSITIONING, ETC.) TO THE VARIATIONS IN ROLLING CON...
Programme: ECSC-STEELRES 6C
Record Number: 13891
Last updated on: 1989-11-24
ID: 7210-EB/401
Data di inizio: 1985-07-01, Termine: 1988-12-31
THE VARIOUS TYPES OF CARBON-STEEL WIRE ROD NOW ON THE MARKET CAN BE DIVIDED INTO TWO MAIN CATEGORIES ACCORDING TO USE : (A) MEDIUM- AND HIGH-CARBON WIRE ROD FOR CABLES, SPRINGS, TYRE PLIES, ETC.; (B) MEDIUM- TO LOW-CARBON WIRE ROD FOR NUTS AND BOLTS, BEARINGS, SOLDERING W...
Programme: ECSC-STEELRES 6C
Record Number: 13886
Last updated on: 1989-11-24
ID: 7210-EB/402
Data di inizio: 1985-07-01, Termine: 1988-06-30
CONTINUOUS CASTING IS BEING USED INCREASINGLY IN THE PRODUCTION OF CARBON AND ALLOYED STRUCTURAL STEELS SUPPLIED IN THE FORM OF ROLLED BARS FOR APPLICATIONS IN THE MOTOR VEHICLES AND GENERAL ENGINEERING SECTORS. INTERNAL AND SURFACE QUALITY REQUIREMENTS ARE PARTICULARLY STRING...
Programme: ECSC-STEELRES 6C
Record Number: 13887
Last updated on: 1994-01-23
ID: 7210-GD/205
Data di inizio: 1985-07-01, Termine: 1988-06-30
OVER THE LAST 20 YEARS, REMARKABLE PROGRESS HAS BEEN MADE IN THE COLD-ROLLING SECTOR. ONE OF THE REASONS FOR SUCH PROGRESS IS THE INCREASING ATTENTION THAT HAS BEEN DEVOTED TO THE PREPARATION OF ROLLING EMULSIONS. WITH THE NEED TO MEET INCREASINGLY STRINGENT REQUIREMENTS, TH...
Programme: ECSC-STEELRES 6C
Record Number: 13882
Last updated on: 1994-01-23
ID: 7210-KG/102
Data di inizio: 1984-07-01, Termine: 1987-06-30
Full-size tubular nodes, either welded or of a composite cast steel/plate design, will be investigated as a logical continuation of previous studies on test bars. These tests will be carried out mainly under random sea state stress sequences in artificial sea-water. The aim is...
Programme: ECSC-STEELRES 6C
Record Number: 6862
Last updated on: 2002-12-13
ID: 7210-KC/701
Data di inizio: 1984-09-01, Termine: 1988-12-31
THE INDUSTRIES USING SHEET STEEL ARE INCREASINGLY TURNING TO HIGH-STRENGTH STEELS. CONSEQUENTLY IT IS NECESSARY TO KEEP UP RESEARCH ON THESE PRODUCTS AS REGARDS THEIR STRUCTURE AND SURFACE FINISH AND ALSO OF COURSE THEIR DEEP DRAWING PROPERTIES. THE PROPOSED PROJECTS CONCENTRA...
Programme: ECSC-STEELRES 6C
Record Number: 14190
Last updated on: 1994-01-23
ID: 7210-KC/102
Data di inizio: 1985-06-01, Termine: 1988-05-31
THE COMMUNITY MARKET FOR COLD-FORGING BARS AND IN PARTICULAR BARS FOR THE MANUFACTURE OF TIES IS BEING INVADED BY IMPORTS FROM THE FAR EAST AND IS IN DECLINE. IT COULD EVEN DISAPPEAR COMPLETELY IF COLD FORGERS CANNOT IMPROVE THEIR COST PRICE. A REDUCTION IN THE COST OF THEIR R...
Programme: ECSC-STEELRES 6C
Record Number: 14192
Last updated on: 1991-01-16
ID: 7210-MA/415
Data di inizio: 1984-10-01, Termine: 1988-09-30
IT IS KNOWN THAT THE RESISTANCE OF METALS TO ABRASIVE WEAR IS DEPENDENT NOT ONLY ON MACROHARDNESS BUT ALSO ON MICROSTRUCTURAL PARAMETERS OF THE MATERIAL SUCH AS MICROSTRUCTURAL HOMOGENEITY AND HETEROGENEITY, DISTRIBUTION OF HARD PHASES, TOUGHNESS, BRITTLENESS, ETC. AS A RE...
Programme: ECSC-STEELRES 6C
Record Number: 14149
Last updated on: 1989-11-24
ID: 7210-KE/412
Data di inizio: 1985-07-01, Termine: 1988-03-31
THIS RESEARCH PROGRAMME IS A CONTINUATION OF THE ONE CARRIED OUT UNDER CONTRACT 7210-KE/409 (FORESCASTING OF DUCTILE FRACTURE - PROPAGATION USING LABORATORY TESTS-SEE CS8-533). AS A RESULT OF THE LATTER, THERE NOW SEEMS TO BE A GENUINE POSSIBILITY OF CHARACTERIZING THE MATERIA...
Programme: ECSC-STEELRES 6C
Record Number: 14162
Last updated on: 1994-01-23
12 3 4 5 6 7 8 9 > 
List retrieved on: 2018-06-19